Problem (HDMI/EPG)
No HDMI audio output.
No HDMI video output.
EPG (GUIDE Plus+) data is
not available
dvdr9000h_eu_eng2.indd 95
dvdr9000h_eu_eng2.indd 95
Troubleshooting
Solution
– You will not hear any sound from the HDMI output if the
source device is only DVI/HDCP-compatible.
– It is not possible to output SACD or copy-controlled DVD-
Audio sources from the HDMI connection.
– Make sure that you have activated this recorder as the HDMI
input in the settings for the device you are using. See HDMI
setting.
– HDMI connection can only be made to HDMI-equipped devices
with HDCP (High Bandwidth Digital Content Protection). If you
wish to connect to a DVI connector (equipped with HDCP), you
will need a separate adaptor (DVI to HDMI).
– Make sure the resolution of this recorder matches the device
you have connected using the HDMI. See HDMI setting.
– To use the EPG, the analogue tuner has to be installed. Installing
only the digital tuner will result in no EPG service information.
(continued)
95
2005-10-13 9:18:24 AM
2005-10-13 9:18:24 AM