Scotts AccuGreen 3000 Manual

Calibration
Your AccuGreen 3000 spreader was calibrated at
® TM
the factory. You may check the calibration as follows:
1.
Adjust the micrometer setting to 6.
2.
Squeeze the trigger against the handle.
3.
The front edge of the shutoff bar should be
flush with the calibration line engraved on the bot-
tom of the hopper.
4.
To adjust alignment, use a small wrench to turn the
black calibration screw at the lower end of the control
wire leading from the micrometer rate setting barrel.
Spend a few minutes on
maintenance after each use
1.
Never leave product in the spreader. Pour leftover material
back into the package and seal the package tightly.
2.
After each use, wash thoroughly to remove all material
clinging to the spreader. Hot water may be required
at times to remove stubborn residue. Allow the
spreader to dry thoroughly in the sun.
3.
Store your spreader in a clean dry place.
NOTE: This unit does not require lubrication.
Thank you
for purchasing a Scotts AccuGreen
®
introduced the first home lawn spreader in 1946 and has continued to offer
superior quality that translates into more accurate application, a better-
looking lawn, and a longer-lasting, more durable spreader. The lawn care
industry's most extensive research, design, and testing have gone into
making the AccuGreen series spreaders the most accurate in their class. With
its durable rustproof hopper, the AccuGreen
Questions, Comments, Information
Call Scotts' toll- free "Lawn Success Made Easy" ™
Consumer Helpline:
Visit Scotts' website at
1-800-543-TURF
www.scottslawn.com
Scotts No-Quibble
Guarantee
®
If for any reason you, the consumer, are not satisfied
after using this product, you are entitled to get your
money back. Simply send us evidence of purchase
and we will mail you a refund check promptly.
The Scotts Company
14111 Scottslawn Rd.
®
Marysville, Ohio 43041
01-AG3000 Printed in USA Printed on Recyled Paper
3000 spreader. The Scotts Company
TM
®
3000 spreader is guaranteed
® TM
to give you great results — now
and for many years to come.
ACCUGREEN 3000 73730
STRIP IN UPC CODE
0 32247 73730 2
PROOF OF PURCHASE
©2001, The Scotts Company. World rights reserved.
SHUTOFF
BAR
CALIBRATION
LINE
• Number 1 selling drop spreader nationwide
• Cushioned, U-shaped handle with positive-
locking on/off control
• Easy-to-read precision micrometer rate setting
for increased accuracy
• Hopper holds 10,000-square-feet (930 sq.
meter) of Scotts fertilizer
• Heavy duty frame
• 22 inch (56 cm) spread pattern for maximum
coverage
• Rustproof hopper, agitator
and polymer components
• Easy-rolling 12-inch (30 cm)
wheels provide high ground
clearance to help prevent clogging
• Scotts No-Quibble Guarantee®
• Made in the U.S.A.
INSTRUCTIONS INSIDE —SAVE FOR FUTURE REFERENCE
DROP SPREADER
Ready to use!
No assembly!
The Scotts Difference
®