Basic Operation - Sharp PN-Y555 Operation Manual

2
5
6
9
10
1. INPUT (Input mode selection)
The menu is displayed. Press
ENTER
mode, and press to enter.
* You can select the input terminal by pressing the input
switch of the monitor.
Input mode
DVI-D input
DVI-D
terminal
HDMI[AV] HDMI input
terminal
HDMI[PC]
D-SUB[RGB]
D-sub input
D-SUB[COMPONENT]
terminal
D-SUB[VIDEO]
USB USB port
When a USB flash drive is connected, the input mode
automatically changes to "USB". The input mode also
automatically changes to "USB" if the power is turned on with
a USB flash drive connected.
2. MUTE
Turns off the volume temporarily.
Press the MUTE button again to turn the sound back to the
previous level.
3. MENU
Displays and turns off the menu screen. (see page 25.)
4. VOL +/- (Volume adjustment)
Pressing or displays the VOLUME menu when the
menu screen is not displayed.
Press or to adjust the volume of the sound.
* If you do not press any buttons for about 5 seconds, the
VOLUME menu automatically disappears.
* To change the volume of video or music when the input
mode is "USB", use "Settings during play". (See page 24.)

Basic Operation

1
3
4
7
8
or to select the input
Video Audio
Audio1 input terminal
HDMI input terminal /
Audio1 input terminal
Audio1 input terminal
Audio2 input terminals
USB port
15
5. BRIGHT +/- (Brightness adjustment)
Pressing or displays the BRIGHT menu when the
menu screen is not displayed.
Press or to adjust the brightness.
* If you do not press any buttons for about 30 seconds, the
BRIGHT menu automatically disappears.
6. ENTER
Confirms the setting.
7. RETURN
Returns to the previous screen.
8. SIZE (Screen size selection)/Yellow
Each time you press this button, the screen size changes in
the following order: (See page 20.)
NORMAL → WIDE → Dot by Dot →NORMAL...
9. DISPLAY/Red
Displays monitor information (Input mode, LAN Setup, etc.).
The display disappears automatically after about 15 seconds.
10. MODE (Color mode selection)/Green
Each time you press this button, the color mode changes in
the following order:
STD (Standard) → VIVID → sRGB→
HIGH ILLUMINANCE → USB → STD...
• HIGH ILLUMINANCE is a display with colors suited to
bright locations.
• sRGB is for DVI-D, HDMI[PC], and D-SUB[RGB] input only.
sRGB is international standard of color representation
specified by IEC (International Electrotechnical
Commission). Color conversion is made in taking account
of liquid crystal's characteristics and represents color tone
close to its original image.
Caution
• When the input mode is [USB], operations 3, 4, 5, 8, 9, and
10 cannot be performed. Change an input mode to other
than USB before performing these operations. COLOR
MODE, VOLUME and SIZE can be changed while a file in
a USB flash drive is being played. (See page 24.)
TIPS
SIZE DISPLAY
MODE
• 8 , 9 , and 10
file in a USB flash drive and when entering text. Colors and
operation names appear in the screen.
31
are also used when playing a
19
E