Table of Contents
Advertisement
Synthetic Paper Grease Filter
The filter has saturation indicators, which are small squa-
res made from a series of dots. When the white paper
inside the squares becomes saturated with grease the
coloured dots start to run and spread across the paper,
indicating that the filter has reached saturation
point and must be replaced.
The synthetic paper grease filter cannot be
cleaned.
It must not be washed.
To Replace the Synthetic Paper Gre-
ase Filter
1.
Open the glass visor.
2.
Press inwardly on the two slide catches and the
grille will open from the front.
3.
Slide the right edge of the grille forward until it
clears the guide and then unhook the left hinge
pin.
4.
Carefully ease out the metal wire retaining clips.
5.
Clean the metal grille and clips before replacing
the filter.
Handle the wire clips with care and keep away
from children as they have sharp points.
This appliance can be a fire hazard if the grease
and charcoal filters are not cleaned and repla-
ced as recommended.
Changing the Light Bulb
If a lamp fails to function check that the bulb is screwed
into the holder.
If bulb failure has occurred then it should be replaced with
a 220-240V 40W clear cylindrical shape bulb with a small
E14 screw thread.
7
Hide quick links:
Advertisement
Table of Contents
