Maintenence; Cleaning The Print Head - Comtec Encore 4 User Manual

The Encore 4 will provide years of reliable service
provided a few simple guidelines are followed. The
printer should be cleaned approximately every two weeks
or more often, depending on usage and the type of media
being employed. Components of the printer that require
periodic maintenance are the print head, print roller, label
peeler and the sensors. When cleaning, please use only
isopropyl alcohol, the same type included in the Comtec
Cleaning Kit. Always use Comtec label or ticket stock for
maximum print quality and extended printer life.
Bar/Gap
Sensor
Platen
Optional Label
Presence
Sensor

Cleaning the print head:

• Always turn the printer off prior to any cleaning
operation.

Maintenence

Cleaning the Encore 4
O-15
Print Head
Peeler
"Open"
Roller
button
continued next page
UMAN-EN4