Tv Output Signal; Toshiba Support; Before You Call - Toshiba TECRA M3 User Manual

TV output signal

Refer also to your Personal Conferencing Kit's documentation.
Problem
Display on TV is poor
No display
If you turn the computer off in Standby mode while the display is on TV, the
computer will select either the internal LCD or an external computer CRT
as the display device.

TOSHIBA support

If you require any additional help using your computer or if you are having
problems operating the computer, you may need to contact TOSHIBA for
additional technical assistance.

Before you call

Some problems you experience may be related to software or the operating
system, it is important to investigate other sources of assistance first.
Before contacting TOSHIBA, try the following:
■
Review troubleshooting sections in the documentation for software and
peripheral devices.
■
If a problem occurs when you are running software applications, consult
the software documentation for troubleshooting suggestions. Call the
software company's technical support for assistance.
■
Consult the dealer you purchased your computer and/or software from.
They are your best sources for current information and support.
User's Manual
Procedure
Make sure the TV type is correct for your area:
NTSC (US, JAPAN), PAL (Europe).
Try adjusting the contrast and brightness controls
on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 5,
If problems persist, contact your dealer.
Troubleshooting
The Keyboard.
9-23