Siemens SPCK420 User Manual page 24

SPCK420/421/422 LCD-Keypad - User Manual
User programming via the keypad > Setting and unsetting the system > FULLSET
FULLSET
The FULLSET option provides the following functionality:
Full protection to a building (opening of alarm zones activates alarm)
Opening of entry/exit zones starts the entry timer. If the alarm is not unset before the entry timer expires, the alarm is
activated
To select the FULLSET option:
1. Scroll to FULLSET.
2. Press SELECT.
The second line displays the exit time and the buzzer sounds to indicate that the user should exit the building.
When the system has been fully set, the LCD displays SYSTEM FULLSET on the bottom line for approximately 10
seconds.
The system fails to set if there is an open or fault condition detected on an alarm zone when the FULLSET or
PARTSET A/B option is selected. The keypad displays the zone number and description.
To set the system, locate the zone and close or fix the fault. Repeat the FULLSET or PARTSET A/B operation.
© Siemens Industry - 11-24-2009