Pre-Assembly; Key Part Description - Kenmore ELITE 141.158033 Operator's Manual

Heavy Duty Rotisserie Assembly
Instructions
Tools required for assembly:
Adjustable wrench or pliers and either a Flat Head or Phillips Head Screwdriver.
Pre-Assembly Instructions
Before assembling your Rotisserie, use the parts list below to check that all necessary parts
have been included. Inspect parts for damage as you proceed. Do not assemble or operate
your Rotisserie if it appears damaged. If you are missinq parts or have questions durinq the
assembly process, call 1-888-317-7642, 8am -8pm CST, Monday throuqh Friday.
141.158033
KEY PART DESCRIPTION PART # QTY
1 Motor Bracket P03307002G 1
2 UNC Phillips Head Screws #10-24x3/4" $112G10124 2
3 UNC Hex Nut #10-24 $362G10124 2
4 Plain Washer 3/16" $411G03084 2
Chrome Spit: For 4 and 5 Burner P05508164F 1
5
6.5" Extension Chrome Spit: For 5 Burner Gas Grill P05508166F 1
6 Holding Forks P05508031A 2
7 Thumbscrews 1/4"x 1/2" $196G04081 2
8 Collar P05508032F 1
9 Bushing P05508033F 1
10 P,C Rotisserie Motor P07101025A 1
11 Thumbscrews 10x1/2" $196G10084 1
12 Spring Washer for 6.5" Extension Spit $431G04064 1
13 Extension Bracket P03308008C 1
14 Phillips Head Screws 3/8"x1/2" $112G06084 2
15 Phillips Head Screws 3/16"x7/8" $112G03144 2
16 Plain Washer 3/16" $411G03084 2
17 UNC Hex Nut #10-24 $362G10124 2
UNC Phillips Head Thumbscrews Thumbscrews
Screws #10-24x3/4" 1/4"xl/2" 10xl/2"
KEY #2 KEY #7 KEY #11
Phillips Head Screws
3/8"xl/2"
KEY #14
Phillips Head Screws
3/16"x7/8"
KEY #15
Extension Bracket
KEY #13
If your grill lid overlaps the side of the grill bowl where you would normally mount the rotisserie
mounting bracket, simply add extension bracket P03308008C to the side of your grill bowl and
then mount the rotisserie mounting bracket to this extension bracket. See Page 3, Figure 2