Troubleshooting................7 I cannot answer a second call............7 The BSP10 accessory turns off unexpectedly........7 Unexpected behaviour...............7 I can't pair a second device with my BSP10 accessory....7 No connection between BSP10 and an Xperia™ device....7 Legal information................8 Declaration of Conformity for BSP10..........8...
To charge your accessory There are two ways to charge your accessory: • Place the BSP10 accessory on any wireless charging plate which supports the Qi inductive power standard. • Using a USB cable, connect the BSP10 accessory to a power source.
Xperia™ device: Make sure that the NFC function is turned on and that the screen is active and unlocked. BSP10: Press and hold down the power button until you hear a beep and a blue notification light flashes rapidly. Position your Xperia™ device in such a way that the NFC detection area of each device touches the other.
The accessory goes into pairing mode and the currently paired Xperia™ device gets disconnected. • On the BSP10 accessory, short press the volume up and down buttons at the same time. The accessory goes into pairing mode and the currently paired Xperia™ device gets disconnected.
No connection between BSP10 and an Xperia™ device • Make sure that the BSP10 accessory is charged and within range of the device that you want to connect to. A maximum distance of 10 metres (33 feet), with no solid objects in between, is recommended.
Prior to use, please read the Important information leaflet separately provided. This User guide is published by Sony Mobile Communications Inc. or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Mobile Communications Inc.
Page 9
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Need help?
Do you have a question about the BSP10 and is the answer not in the manual?
Questions and answers