Table of Contents
Advertisement
6.5
Register a Handset
Your handset is pre-registered to the base station. Up to five handsets can
be registered to a a single base station.
If for some reason, the handset is not registered to the base station,
REGISTER" will be displayed on the handset screen, register your handset
following the process below.
1. Press and hold on the base station for about five seconds, the base
station is entered into registration mode.
M
2. Press
M
3. Press
4. Enter the 4-digit system PIN and press
NOTE
If the handset registration is successful, the handset will automatically
be allocated the next available handset number. This handset number is
shown in the handset display in standby mode.
.
and
to select REGISTRATION.
and you are requested to enter the 4-digit system PIN.
M
to confirm.
40
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Loop Plus and is the answer not in the manual?
Questions and answers
Can you adjust the number of rings before answering
To adjust the number of rings before answering on the iDect Loop Plus:
1. Press and navigate to select ANS. MACHINE.
2. Press and navigate to select TAM SETTINGS.
3. Press and navigate to select ANSWER DELAY.
4. Press and select the desired number of rings (2, 4, 6, or 8 rings).
5. Press to confirm.
This answer is automatically generated
Hi how do I block unwanted phone numbers
The iDect Loop Plus has a call blocking function, but the provided context does not include specific steps on how to block unwanted phone numbers. Refer to the device manual for detailed instructions.
This answer is automatically generated
How do I increase volume on Idect Loop phone?