Hold/Paging; Mic/Mute Button/One Touch - Toshiba DP5000 Series Quick Reference Manual

Conference Calls
To hold a conference call
If you are the "master" conference controller,
press
conference call on hold.
The conference continues and you can join at any time without
giving up "master" abilities. Music-on-hold is suppressed in this
mode.
To conference two outside Lines
1. While talking on an outside call, press
2. Access an outside line.
3. After the party answers, press
Note If you receive a busy tone or if the station does not answer,
press the flashing line button to return to the original call.
Hold
1. To place a call on Hold, press the
2. To return to the held call, press the held line's button.
If you do not return to the held call, it rings back to your phone. If
you are busy on another call, you hear two tone bursts. If the held
party hangs up, the call is released.
To place a call on Exclusive Hold
While on a call, press
Hold; no one else will be able to access that line.
To place a call on Automatic Hold
While on a call, press another extension button to receive/
originate a new call. You can switch between calls without having to
press
Make sure this feature is programmed on your system; if not,
existing calls will drop.
Mic/Mute Button
Mute on the IP5000-series telephones mutes not only the microphone
but also the handset microphone as well. The MIC button on the
telephones toggles between Mic and Mute. When Mic button is lit,
handsfree communication is supported, when
is off, Mute is enabled.
During a handsfree conversation, press the Mic key, the red
indicator will turn off; the microphone and handset are muted.
Press the Mic key again to resume hands free communication, the
red indicator will turn on.
One Touch
To store a number on the One Touch button
1. Dial #9876.
2. Press a One Touch button.
3. Enter the number to be stored.
4. Press the One Touch button again.
Note One Touch buttons must be programmed on a Programmable
Feature Button.
Paging
To make an All Call Page
1. With the handset off-hook, press All Call Page. This pages all
phones in the All Call Page Group, and may page external speakers
(depends on programming).
2. Make your announcement, then hang up.
continued
once (or twice for Executive Hold) to place the
.
.
twice and hang up.
button.
twice. This places the call on Exclusive
is pressed and light
0
0