Check Drive Belt Tension - Victory Vegas 2008 Owner's Manual

Drive Belt

Check Drive Belt Tension

New drive systems (new belt & sprockets)
After 500 miles on drive system
The following data is provided for use with a Sonic Tension Meter. Follow the instructions provided with the meter.
Required Data
Span
Belt width
Belt mass constant
Drive Belt Wear Analysis
Internal tooth cracks (hairline):
OK to run, but monitor condition
Fuzzy edge cord:
OK to run, but monitor condition
Drive Belt Deflection (with 10 lbs. of force)
VEGAS LOW
5 mm +/- - 0.5 mm (13/64" +/- - 1/64")
6 mm +/- - 0.5 mm (15/64" +/- - 1/64")
658.3mm
28mm
7.9
External tooth cracks:
Replace belt
Hook wear:
Replace belt
VEGAS / VEGAS 8-BALL / ALL KINGPIN
Required Data
Tension (new belt)
Tension (after 500 miles)
Missing teeth:
Replace belt
Stone damage:
Replace belt if damage is on edge
MAINTENANCE
12 mm +/- - 1 mm (15/32" +/- - 1/32")
12 mm +/- - 1 mm (15/32" +/- - 1/32")
50.6 Hz
48.3 Hz
Chipping (not serious):
OK to run, but monitor condition
Bevel wear (outboard edge only):
OK to run, but monitor condition
93