Table of Contents
Advertisement
UTT Technologies
Pre-shared Key: This key serves as seed for generating encryption keys. It must be
identical to the remote wireless network device's. It must be between 8 and 63
characters long.
6.1.3.2 Bridge Mode
If you want the Wireless Router to operate in bridge mode, please select Bridge Mode
from the Opeartion Mode drop-down list, see Figure 6-8. In this mode, the Wireless
Router can connect to other wireless network devices in repeater mode or lazy mode.
However, in this mode wireless clients are unable to connect to the Wireless Router
directly.
Operation Mode: Here please select Bridge Mode.
The other paramters are the same as those of Repeater Mode. Please refer to Section
6.1.3.1 Repeater Mode for detailed information.
http://www.uttglobal.com
Figure 6-8 Basic Wireless Settings - Bridge Mode
Chapter 6 Wireless
Page 86
Advertisement
Table of Contents
Need help?
Do you have a question about the HiPER 518W and is the answer not in the manual?
Questions and answers