How To Add A User; How To Delete A User - Honeywell Tuxedo Touch Wi-Fi User Manual

How to Add a User

Your installer set up users at the time of installation. To add more users, do the following:
Press the Setup , System setup
Enter your Authorized Code. Press the box next to Enter User Name and type in the user name (max. 6
characters; no spaces between characters); press the OK icon.
Select the User Number field and enter an "available" (3-digit) user number (see note below); press GO.
Select the Enter User Code field and enter the 4-digit User Code for this user; press GO.
Select the RF Button Zone field (if used); enter the 3-digit RF Button Zone for this user; press Save.
Notes:
• For available user numbers, refer to the control panel instructions.
• If assigning this user to wireless key, enter one of the zone numbers of the keyfob (the wireless key
must be programmed first before it can be assigned to a user).
• Select the partitions, access level, and enter an available user number for this user. Available user
numbers:
For Residential enter a number from 002-049.
For Commercial enter a number from 002-250.
How to Add an Existing User to a Second Tuxedo
After adding a user to the first Tuxedo, the same user can be added to a second Tuxedo. From the
second Tuxedo go to "User Setup" and enter the same user name and same user code (refer to "How to
Add a User" above). The second Tuxedo automatically updates the user information. Press Save.

How to Delete a User

Select the User you want to delete and press the DELETE USER
and press the appropriate icon. The Confirm Delete screen is displayed.
Notes:
Three selections are available: add a user, edit a user, or delete a user.
•
The authorized code for deleting, adding, and editing users is dependent upon the alarm panel
•
you are interfacing with. Check your alarm panel Installation and Setup Guide to determine
who can delete, add, and edit users.
How to Edit a User
Note: You cannot edit a User name or User number. To modify a User name or User number, you must
delete the User and re-enter the User. Edit a User as follows:
Press the EDIT USER
and press Save.
Notes:
The authorized code for deleting, adding, and editing users is dependent upon the alarm panel
•
you are interfacing with. Check your alarm panel Installation and Setup Guide to determine
who can delete, add, and edit users.
When you select Save, the configuration changes are saved and you are returned to the User
•
Setup screen.
Using the Security System (cont'd)
, USER SETUP
icon and enter your Authorized Code. Select the options needed for this user
and ADD USER
icon. Enter your Authorized Code
30
icons.