Connecting A Blu-Ray Tm / Dvd Player, Satellite Receiver With Colorstream Tm Or Vcr - Toshiba 32L2400U User Manual

6 Connecting YourTV
Connecting a Bht-rco 'a_I / D VD player, satellite receiver with ColorStream_ oi" VCR
Connecting a Blu-ray
TM
/ DVDplayer,satellite receiver w ith
ColorStream
TM
orVCR
TV back panel From antenna
_ COLOR _TREAMHD/VIDEO IN HDMI IN
Fra
satellite_sh _ I
Satellite receiver, Blu-ray
TM
orDVD player
(Sample Illustration) 32/40/50L2 400_Connecting a B/u-ravTM /
D VD pl_o,'eror Satellite receiver with ('olorStream
TM
(or VCR).
NOTE
OolorStream
T M
andcomposite videocables cannot b e connected
simultaneously.
Items needed:
Coaxial cables
Standard AV cables
If you have a lnono VCR, connect L/MONO on the TV to your
VCR's audio out terminal using the white audio cable only.
Standard audio cables
Component video cables
o,** You can connect the component video cables (plus audio
cables) from the DVD player or satellite receiver to the
COLOR STREAM HD terminal in the TV. The COLOR
STREAM HD terminal can be used to display Progressive
(480p, 720p) and Interlaced (480i, 1080i) scan systems.
Please note that 1080p is not supported. Check the User's
Guide of the DVD player in order to determine the best
output signal available.
o:* If your DVD player or satellite receiver does not have
component video, connect a standard A/V cable to the
AUDIO/VIDEO terminal. If your DVD player has HDMT*
video, see "Connecting an HDMI(R)or DVI device to the
HDMI(R_input" on page 27