Table of Contents
Advertisement
CARE ANDCLEANING
Self-Cleaning Cycle
The Clean Cycle, including cool down
time, is automatically set for 4 hours,
but you may change this from 3 hours if
oven is lightly soiled, up to 5 hours if
oven is heavily soiled.
1. Press the CLEAN
pad. 4 hours will
show in the display.
(_(_
2. If you want to change
the length of clean
HOUR
MIN
time press the
_
(_
HOURMINUP
and/or DOWN arrow
pad.
3. Press the START
pad.
Simply press the CLEAR/OFF
pad
You will need to wait for the oven
temperature to drop below the lock
temperature (approx. 1 hour) before
attempting to open the door.
After the cycle, you may notice some
white ash in the oven. Just wipe it up
with a damp cloth or sponge.
If white spots remain, scrub them with a
soap-filled steel woot pad. Be sure to
rinse thoroughly. These are usually
deposits of salt that cannot be removed
during the cycle.
If for any reason you are not
satisfied
with the cleaning
results,
just repeat
the cycle.
(_
1. Press the CLEAN
pad
_
2. Ifyouwantto
change the length
HOUR
MIN
of clean time press
_(_
the HOUR/MIN
UP and/or DOWN
arrow pads,
3. Press the DELAY
START TIME
pad.
_
4. Pressthe
HOUR/MIN
UP
HOUR
MIN
and/or DOWN
(_(_
arrow pads to set
the time you prefer
the clean cycle to
start.
5. Press the START
pad.
2O
Advertisement
Table of Contents
