Bosch ICP-EZM2 System Reference Manual page 49

Easy Series Control Panel
Programming Item
Point Alarm Verification
Faulted Points Allowed Threshold
Exit Delay
Entry Delay
Exit Time Restart
Recent Close Enabled
Swinger Bypass Count
Auto Protection Level
System On Order Options
Cross Zone Timer
Clear Alarm Memory
Latching Point and Enclosure
Tamper
Latching System Device Tamper
Verbose System Test Enabled
Demo Mode
Restrict Installer Passcode
Test Report Hour
Bosch Security Systems, Inc.
Item Selections
Number
124 0 = None
1 = Cross zone
2 = Intelligent threat assessment
3 = Confirmed alarms 1
4 = Confirmed alarms 2
125 0 to 8
126 45 to 255 sec
127 30 to 255 sec
128 0 = User cannot reset Exit Delay timer
1 = User can reset Exit Delay timer one time
129 0 = Report not sent
1 = Report sent
131 0-15
132 0 = System turns on (unoccupied).
1 = System only turns on (unoccupied) if a
perimeter point is faulted during Exit Delay.
133 1 = "Stay," "Leave," "Custom"
2 = "Stay," "Custom," "Leave"
3 = "Leave," "Stay," "Custom"
4 = "Leave," "Custom," "Stay"
5 = "Custom," "Leave," "Stay"
6 = "Custom," "Stay," "Leave";
134 60 to 3600 sec
136 0 = By user, 1 = By master user
137 0 = Any user can clear condition
1 = Only the installer can clear condition
138 0 = Any user can clear condition
1 = Only the installer can clear condition
139 0 = Test results announced only at end of all tests
1 = Test results announced after each test
140 0 = Telephone messages heard only on phone
1 = Telephone messages heard on phone and
control centers
2 = Turn announcement of telephone messages
over the control center on or off at the control
center
142 0 = Master user not needed
1 = Master user needed
143 0 to 23
System Reference Guide
Programming | en 49
Manuf.
Default
0
3
60
30
1
1
1
1
1
120
0
0
0
1
0
0
2014.09 | 01 | F.01U.306.221