Timer Delay Stop/Start; Sleep Feature - Kenmore Air Conditioner Owner's Manual

Air Conditioner Features
(continued)
TIMER: DELAY STOP / START
FEATURE
®
DO THIS:
PRESS
TIMER BU]q-ON
YOU WILL SEE: TIMER SETTING
® :::::0:::::
LIGHT On
Note: For Delay Stop, the unit must be in the On position.
Note: For Delay Start, the unit must be in the Off position.
To adjust timer setting, tap or hold the UP arrow(A)
DOWN arrow(v) to change delay timer at .5 hour
increment, up to 10 hours, then at 1 hour increments up
to 24 hours. The control will count down the time
remaining until start (8, 7.5, 7, etc.). The Delay Start mode
automatically selects cooling with maximum Fan Speed.
The temperature maintained will be the same as previously
set. To change the set temperature, press "COOL" then Up
or Down arrows until the desired temperature is indicated
on the display. After 5 seconds, the control will
automatically change the display back to the hours
remaining until the unit will start/stop. Turning the unit
"ON" or "OFF" at any time will cancel the Delay Start/Stop
function.
SLEEP FEATURE:
|
)
{N
DO THIS:
PRESS SLEEP
BUTTON
YOU WILL SEE:
LIGHT On
@
In this "MODE" the selected temperature will
increase by 2 degrees F 30 minutes after the mode is
selected. The temperature will then increase by another 2
degrees F after an additional 30 minutes. This new
temperature will be maintained for 7 hours before it returns
to the originally selected temperature. This ends the
"Sleep" MODE and the unit will continue to operate as
originally programmed. The "Sleep" MODE program can
be cancelled at any time during operation by pressing
"Sleep" MODE button.