Advertisement
Table of Contents
- 1 Product Description
- 2 Product Overview
- 3 What’s in the Box
- 4 Charging
- 5 Transmitter - Turn on / off
- 6 Transmitter - Pairing with a Bluetooth Device
- 7 Pairing Procedure
- 8 LED Indications
- 9 Receiver - Turn on / off
- 10 Receiver - Pairing with a Bluetooth Device
- 11 Obtaining the Maximum Stable Range
- 12 Use Two as a Pair
- 13 Reconnect
- 14 Restore Factory Default Setting
- 15 Product Specification
- 16 Safety Information
- Download this manual
Advertisement
Table of Contents
Related Manuals for Avantree Saturn Pro
Summary of Contents for Avantree Saturn Pro
-
Page 2: Product Description
Bluetooth High quality audio streaming. The Saturn Pro is simple to use and enables any audio device to transmit and receive. It can be used to enable a phone to transmit music to a home stereo system, or just as easily, to allow a CD player or other device to transmit music to a Bluetooth enabled speaker system or headphones. -
Page 3: Product Overview
(2) Multi-Function Button (MFB) (Power On/Off / Pairing / Pause / Play) (3) Micro USB charging socket (4) 3.5mm audio jack (5) TX / RX switch What’s in the box: Avantree Saturn Pro A． 3.5mm audio cable B． RCA audio cable C．... - Page 4 Saturn Pro for the first time. Insert one end of Micro USB charging cable to Saturn Pro Micro USB socket and plug the other end into a standard USB power source, such as a laptop or desktop computer.
- Page 5 1) Ensure Saturn Pro is set to TX mode and that the device is off. 2) Plug the 3.5 mm audio cable into Saturn Pro, and plug the other end into the audio output of audio source system iPod, TV, Amplifier etc.)
- Page 6 1) Ensure Saturn Pro's TX/RX switch is set to RX mode and that the device is off. 2) Plug the 3.5 mm audio cable into Saturn Pro’s 3.5 mm audio socket and plug the other end into the audio input of your home hi-fi stereo system.
- Page 7 4) Every time Saturn Pro powers on, it will connect to the last connected device automatically. If you want to pair it to another devices, please turn off the current paired device's Bluetooth mode and then try to pair Saturn Pro to the new device, according to the above pairing procedure.
- Page 8 C. Auto off: Saturn Pro will automatically power off if no devices are connected within 5 minutes. 10. Restore Factory Default Setting Ensure Saturn Pro is powered off, then press and hold the MFB for 10 -12 seconds, until both the BLUE and RED LEDs are both on for about one second.
- Page 9 The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. Avantree is a trademark owned by Avantronics limited. apt-X™ words and logos marked with a ™ or ® are trademarks registered or owned by CSR plc or one of its group companies and may...
Need help?
Do you have a question about the Saturn Pro and is the answer not in the manual?
Questions and answers