Advertisement
Display Modes Available For LTC 2600 Series Multiplexers
Full Screen Display: Shows one camera, full screen on one monitor.
Press the FULL SCREEN key on the front panel and then press the
appropriate camera number.
Quad Screen Display: Divides the screen into four separate viewing
areas. Press the QUAD key once to enable the feature. Press the key
repeatedly to toggle through the different viewing configurations
(three for the 9-channel model; four for the 16-channel model; eight
for System4 models). Pressing ALT
through all quad screens.
Multiscreen Display: Enabling this feature shows one of five
different multiscreen configurations: 4x4 (16 cameos), 12+1, 8+2,
3x3, and 4+3. Press the MULTI key repeatedly to toggle through the
different selections.
Cameo Mode: When in MULTI or QUAD modes, the screen area
where a camera is displayed is called a cameo. Note that the
numbered front panel keys can refer to either cameras or cameos.
Press the CAMEO key to toggle the operation of these keys to the
cameo function the cameo LED is illuminated when the multiplexer
is in the cameo mode). Press the CAMEO key again to revert to the
camera function.
O
p
e
r
a
t
i
n
Assign a Camera to the Cameo
1) In multi or quad display mode, press desired camera key; press CAMEO key;
cameo selected will display flashing camera title. Select desired camera, cameo will
display the selected camera.
Press the CAMEO key to store and/or exit.
2) Press ALT then SELECT
selected and will show a flashing camera title. Press desired camera key. Cameo #1
, then SEQ will sequence
will display selected camera, and cameo #2 is automatically selected. Repeat
procedure for remaining cameras.
Press the ALT key to exit at anytime.
REC
PLAY
g
I
n
s
t
r
u
keys (ALT LED will flash). Cameo #1 will be
Recording Live Pictures
Press the green ALT key and then press RECORD. This
key combination toggles the record mode on and off.
For System4 LTC 2672 or LTC 2682 Series:To activate
both VCR outputs, press ALT, then 2, then RECORD.
Playback
To playback the recorded pictures, press the green ALT
key and then press PLAY.
For the Simplex models, Record mode must be turned OFF.
c
t
i
o
n
s
Advanced Functions
Zoom: Enables the active camera display (a cameo in multi or
quad display) to be digitally enlarged by a factor of 2:1. "Zoom"
will be displayed on the monitor screen. Use the arrow keys for
closer inspection of any part of the selected image.
Freeze: Holds the selected camera picture on either full screen
or cameo. Press the FREEZE key again to release the image
from this function. Changing the display screen mode releases
the freeze mode from all cameos.
Alarms and Actions Acknowledge:
When an alarm or action condition occurs, the action alarm
camera picture displays in full screen on Monitor B and the
ALM or ACT LED Flashes. "ALARM"/"ACTION" will also
flash on Monitor A. Clearing an Alarm/Action by pressing
ACT
or ALM
will stop any recording associated with that
function. The method of clearing alarms or action conditions
depends on your multiplexer model.
Please refer to Section 3 in the instruction manual for advanced
operation features.
Advertisement
