Table of Contents
Advertisement
Safety Information
Caution
Observe the following cautions when installing this unit.
■ It is recommended that the unit should be installation by a
professional.
The installation requires specialty and technical experience; to
ensure safety, entrust the dealer to carry out the installation.
■ Make sure no wires are damaged.
Avoid damaging any wires while making the connection by keeping
away from screws on the chassis or moving parts of seats. Never
twist the wires or position them near a heat source.
■ Make sure the unit is installed correctly.
Avoid installing the unit at a location subject to vigorous vibrations.
The ideal installation location is near the back mirror where an
optimal view can be obtained.
Make sure the lens is within range of the windshield wiper so that a
clear view is ensured.
DO NOT install the unit on tinted window glass as that could
damage the light-colored film.
Make sure the unit is installed at a location that is free from any
influence of thermal film and away from any device that may
generate electronic interference.
Precautions when using a Micro SD Card
■ Never remove the SD card when the unit is in the process of
shutting-down or operating. Failure to comply could corrupt the files or
damage the unit.
■ A Class- 6 Micro SD card with 8GB capacity or more is recommended
(Max. support up to 32GB).
Safety
■ Before using this unit, format the Micro SD Card by this unit.
Information
7
Advertisement
Table of Contents
