Page 3
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide Revision History Issue Issue Date Details of Change version September First release of document. 2014 Proprietary and Confidential to PMC-Sierra, Inc. Document No.: CDP-00301-01-A Rev A, Issue...
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide Contents Adaptec by PMC Product Support..........................5 Limited 3-Year Hardware Warranty..........................6 Regulatory Compliance Statements..........................7 1 About This Guide..............................10 What You Need to Know Before You Begin....................10 Terminology Used in this Guide........................10 How to Find More Information........................10...
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide Adaptec by PMC Product Support If you have questions about installing or using your Adaptec by PMC product, check this document first—you will find answers to most of your questions. If you need further assistance, use the support options listed below.
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide Limited 3-Year Hardware Warranty 1. PMC-Sierra, Inc. (“PMC-Sierra”) warrants to the purchaser of this product that it will be free from defects in material and workmanship for a period of three (3) years from the date of purchase. If...
UL Compliance Statement Adaptec by PMC products are tested and listed by Underwriters Laboratories, Inc. to UL 6095 0-1 Second Edition and IEC-60950-1 Second Edition standards, file numbers E175975. These products are for use only with UL listed ITE.
Page 8
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide Special International Committee on Radio Interference Compliance Statement (CISPR 22) This product has been found to comply with the requirements of the Information Technology Equipment -- Radio Disturbance Characteristics -- Limits and Methods of Measurement (CISPR 22).
Page 9
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide This equipment is home use (Class B) electromagnetic wave suitability equipment and to be used mainly at home and it can be used in all areas. Proprietary and Confidential to PMC-Sierra, Inc.
You can find more information about your SAS Expander Card and the software and utilities included with it by referring to this document: • Serial Attached SCSI (SAS) Expander Card Installation and User's Guide (this guide)—Describes how to set up and install your SAS Expander Card and connect internal and external storage devices.
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide Kit Contents and System Requirements This section lists the contents of your SAS Expander Card kit and the system requirements for successfully installing and using your expander card. Kit Contents •...
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide About Your SAS Expander Card This section provides an overview of the features of your SAS Expander Card. Standard SAS Expander Card Features • Support for both SAS and SATA devices •...
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide Compatible Devices • 2.5-inch and 3.5-inch SAS-3, SAS-2 and SATA drives • Non-disk devices including SAS expanders • Supports drives of mixed capacity • SAS-3 and SAS-2 host controllers (RAID and Non-RAID) Block Diagram Proprietary and Confidential to PMC-Sierra, Inc.
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide Board Dimensions This table shows lists the board dimensions of your SAS Expander Card AEC-82885T . Dimension SAS Expander Card AEC-82885T Height 2.535" Length 6.00" PCB Thickness 0.062" Max Component Height, Top Side 0.570"...
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide About the Adaptec SAS Expander AEC-82885T The SAS Expander Card AEC-82885T is a expander card with these features: 4 internal mini-SAS HD connectors UART 3 internal I2C for connector CN4...
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide Installing and Connecting the SAS Expander Card This section explains how to install your SAS Expander Card and connect it to internal and external disk drives. Before You Begin • Read Safety Information on page 23.
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide 2. Attach the low-profile bracket to the expander card. The low-profile bracket is installed on the back side of the expander, with the mounting screws inserted from the front, as shown the Figure 3.
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide SAS Connectors This section shows the internal and external SAS connectors. D E F G Connector Wide-Port to Controller Wide-Port to Expander Direct-Attached to Disk Yes – SAS ports 0-3 Yes –...
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide Installing the SAS Expander Card Follow the steps below to install your SAS Expander Card card and connect your internal or external storage devices. Caution: Be sure to handle the expander by its bracket or edges only.
Page 20
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide • Connect SAS HD cables between the expander card and internal disk drives: 7. Close your computer cabinet, reconnect the power cord and network cables, then power up the system.
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide Configuring the SAS Expander Card After installing the SAS Expander Card in a server system, download and install the latest drivers (.inf files only) from the Adaptec Web site at start.adaptec.com. See...
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide Solving Problems This section provides basic troubleshooting information and solutions for solving problems with your SAS Expander Card. Troubleshooting Checklist If you encounter difficulties installing or using your SAS Expander Card, check these items first: •...
• Put the expander down only on an anti-static surface such as the bag supplied in your kit. • If you are returning the expander to Adaptec by PMC Product Support, put it back in its anti-static bag immediately.
Additionally, when chassis mounting the SAS Expander Card with screws (rather than installing in a PCIe slot), airflow must run horizontal to the fins of the heat sink. Forced airflow is required. Contact Adaptec Support for more information about the chassis mount option.
Page 25
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide Index boards, See expander kit contents cards, See expander low-profile bracket installing descriptions 16–17 disk drives mini-SAS electrostatic discharge expander operating systems 16–17 16–17 disk drives SAS cables expander card...
Need help?
Do you have a question about the Serial Attached SCSI (SAS) Expander Card and is the answer not in the manual?
Questions and answers