Security Menu Options; Table 3-12. Bios Setup Security Menu Options - Fujitsu Stylistic 3400 Technical Reference Manual

Security Menu Options

Security menu options for the Stylistic 3400 pen tablet are described in Table 3-12. Note that settings for
some security menu options determine whether other options are available.
Option
Supervisor Password Is
User Password Is
Set Supervisor Password
Set User Password
Minimum User Password
Length
Password On Boot

Table 3-12. BIOS Setup Security Menu Options

Settings
Enabled
Disabled
Enabled
Disabled
(Tap on the setting field for
this option or press the
<Enter> key to specify a
supervisor password.)
(Tap on the setting field for
this option or press the
<Enter> key to specify a user
password.)
Disabled
Enabled
Description
Indicates whether a supervisor password has been
specified. (This field cannot be changed directly. To
enable or disable the supervisor password, enter a
new password or clear the old password using the
Set Supervisor Password option.)
Indicates whether a user password has been
specified. (This field cannot be changed directly. To
enable or disable the user password, enter a new
password or clear the old password using the Set
User Password option.)
Specifying a supervisor password grants access to
all password protected Security menu options.
When a supervisor password is enabled and a user
password is used to enter BIOS Setup, the user
cannot access the following Security menu options:
Set Supervisor Password, Floppy Disk Access, and
Hard Disk Boot Sector.
When enabled, a supervisor password (or user
password if used) is required to run BIOS Setup.
Specifying a user password grants access to the
following Security menu options only: User
Password, Password On Boot. Other Security menu
options are not accessible.
(When a supervisor password is enabled and a user
password is used to enter BIOS Setup, the user
cannot access the following Security options: Set
Supervisor Password, Floppy Disk Access, Hard
Disk Boot Sector.)
When enabled, a user (or supervisor) password is
required to run BIOS Setup.
Note that a supervisor password must be enabled
before a user password can be specified.
Set the minimum length for the user password. Once
this field is set, the user cannot enter any passwords
less than the minimum length.
Select [Enabled] to require a user or supervisor
password to boot the system. Note that a user or
supervisor password must be specified before this
option can be enabled.
BIOS Setup
3
18