Contents Important Safety Information Introduction Package Contents SHOWWX+ HDMI Laser Pico Projector ™ Getting Started Install Battery Charge Battery Power ON or OFF Connect to a Video Source How To Connect To An iPod, iPhone, or iPad Connecting To HDMI Video Sources...
Intended Use Statement » Do not disassemble the battery or modify it in any way. The SHOWWX+™ HDMI Laser Pico Projector is designed to operate with the MicroVision » Do not attempt to short out the battery. specified battery and MicroVision battery charger in a normal office and home environment »...
Page 4
Safety Labels Regulatory Statements The SHOWWX+™ HDMI Laser Pico Projector is a CLASS 2 LASER PRODUCT as defined FCC Declaration of Conformity in IEC 60825-1, 2007-03. MicroVision has designed the SHOWWX+ HDMI to be safe This device complies with Part 15 of the FCC Rules. Operation is subject for general use as a mobile projector.
You can find the Serial Number located under the battery. Register your Product Online Registering your new MicroVision product online is quick and easy. Your registration will allow us to serve you better over the lifetime of your product. Being a registered owner also keeps you informed of important product notifications and helps us continue to design products that meet your needs.
SHOWWX+ HDMI Laser Pico Projector Getting Started ™ Install Battery Micro HDMI Input Window Remove Battery Door Down/Hot Key 2 Up/Hot Key 1 Insert Battery Power Button Menu/Select Button LED Indicators Close Battery Door Micro-USB/Power Input Video Input » Make sure the projector is OFF and unplugged before replacing battery.
Charge Battery Connect to a Video Source The SHOWWX+™ HDMI can connect to a variety of devices with video-out such as an iPad, iPhone, iPod, tablet computer, laptop, cell phone, camera, and more. The following describes the connectivity options available with the SHOWWX+ HDMI.
Connecting to HDMI Video Sources Usage Guidelines The SHOWWX+ HDMI can connect to a variety of devices that provide HDMI video-out. There are two main factors to consider when using A micro-to-micro HDMI cable is provided. HDMI-approved third party cables are available the SHOWWX+ HDMI.
ASPECT RATIO and press The SHOWWX+ HDMI has an onscreen display to allow the user the ability to make advanced changes to the projector. All settings changed by the user will remain even when powered off.
How To Adjust The Color Alignment How to Check Remaining Battery Life Users can adjust horizontal or vertical alignment of each individual color Follow these instructions to view how much battery life is remaining. (red, green, and blue). Press the button to bring up the on screen menu.
Clean the Window, - OR - -OR- Registering your new MicroVision product online is quick and easy. Your registration will allow Image is misaligned. Adjust Image Alignment. us to serve you better over the lifetime of your product. Being a registered owner also keeps...
Page 12
THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH Ninety (90) days WARRANTIES SHALL BE LIMITED IN DURATION TO THE If a valid warranty claim is received by MicroVision or its DURATION OF THE EXPRESS WARRANTY AND TO THE REPAIR authorized service representative during the Warranty...
Need help?
Do you have a question about the ShowWX and is the answer not in the manual?
Questions and answers