Related Manuals for Panasonic AY-NE2000
Summary of Contents for Panasonic AY-NE2000
- Page 1 Nonlinear AV Workstation Main Kit AY-NE2000 ® Before attempting to connect or operate this product, please read these instructions completely...
-
Page 2: Table Of Contents
The exclamation point within an equi- event of theft. lateral triangle is intended to alert the user to the presence of important Model No. AY-NE2000 operating and maintenance (servicing) instructions in the literature accompa- Serial No. nying the appliance. SA 1966 WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. -
Page 3: Preface
PREFACE The AY-NE2000 Panasonic Nonlinear AV Workstation Main Kit is a combination of powerful hardware, flexible software and a custom human interface developed for professional post-production work. With the AY-NE2000 AV Workstation, nonlinear editing is a creative process that finishes your videos to high standards while main- taining production budgets. -
Page 4: Precautions
PRECAUTIONS • Do not expose the main unit and jog pad to rain or • Use the main unit or jog pad in an environment moisture, and do not try to operate the equipment in where the temperature is within 32°F ~ 95°F (0°C ~ wet areas. -
Page 5: Major Operating Controls And Their Functions
MAJOR OPERATING CONTROLS AND THEIR FUNCTION FRONT PANEL 1. Power On/Off Switch 6. Front Panel Turns the power of this unit on and off. Caution: Do not interrupt the Vent Hole on this Notes: panel. 1. Be sure to turn on the power of this unit after turning on the Hard Disk Box. - Page 6 REAR PANEL MOUSE SEPIAL 1 SEPIAL 2 PRINTER S-VGA VIDEO(DIGITAL) AUDIO (AES/EBU) SCSI AUDIO SCSI VIDEO 1 SCSI VIDEO 2 SCSI VIDEO 3 CONTROL 1 CONTROL 2 JOG PAD SEE MANUAL ADV REF COMPOSITE G/L IN COMPOSITE TC IN OUT1 LOOP VIDEO VIDEO...
- Page 7 19. SCSI VIDEO Connectors (SCSI VIDEO 1-3) 28. AUDIO IN 1/2 Jacks (IN1, IN2 L/R) (Unbalanced) Connects with the SCSI Video Connector of the Hard Accepts the audio signal. Disk Box AY-EB2000 or WJ-EB1000 via the optional The audio signal supplied to these jacks can be SCSI Cable AY-CA68SR3 for AY-EB2000 or AY- saved in the Hard Disk Box.
- Page 8 JOG PAD 1. Positioner 5. ZOOM / Moves the selection cursor (when selection is con- Zooms in the time line. firmed). (SHIFT + ZOOM) Zooms out the time line. 2. Wipe Lever 6. GOTO / Controls Wipe, Key Size, and Audio Level. Jumps to the starting or editing mark.
- Page 9 8. MARK IN Sets or cancels the starting mark. (SHIFT + MARK IN) Selects the grip of the IN point. 9. PLAY/STOP Plays back or stops. (SHIFT + PLAY /STOP) Plays back between the starting and ending marks. 10. Shuttle Ring Plays back video and audio forward (clockwise) or in reverse (counterclockwise) with variable speed.
-
Page 10: Connection
CONNECTION These connections should be made by qualified service personnel or system installers. Cable Information Necessary cables for this system are shown below. SCSI Cable (AY-CA68SR3/AY-CA50SR3) Connects with the HDD-BOX. Coaxial Cable (with BNC Connector) Connects with the VCR or Monitor. 2-conductor shielded cable (with XLR-3-12C Connector) Connects with the powered speaker), cassette tape recorder, CD player, VCR. - Page 11 Coaxial Cable / BNC Connector RCA Pin-plug Connect single-conductor shielded wire as shown below. Coaxial Cable Soldering Inner BNC Connector 3 mm Ground Interconnection of BNC Coaxial Cable BNC Connector BNC Connector BNC Interconnector XLR-3-12C Connector Connect the 2-conductor shielded wire as shown below. Screw Washer (Hot)
-
Page 12: System Connection
SYSTEM CONNECTION The following system connections should be made by qualified service personnel or system installers. HDD-BOX Connection 1. HDD Installation to HDD-BOX Refer to the Instruction Manual of the AY-EB2000 or WJ-EB1000 Hard Disk Box Installation instructions. 2. Connection from HDD-BOX to the Unit (AY-EB2000 or WJ-EB1000) To connect HDD-BOX to the Unit, the optional SCSI cable AY-CA68SR3 for AY-EB2000 or AY-CA50SR3 for WJ- EB1000 is necessary. - Page 13 OUT2 Extension Cable AUTO AC IN (accessory) OUT1 AUDIO AUDIO OUT2 BALANCED BALANCED OUT1 OUT2 AUDIO IN AUDIO OUT Control Unit Key Board Panasonic Print Scroll Pause Screen Lock SysRq Break & Page ←Backspace Insert Home Lock Page Delete Down...
- Page 14 Jog Pad Connection Connect the JOGPAD Connector of this unit to the Jog Pad. After connecting, tighten the screws on the Jog Pad Cable (provided). MOUSE SEPIAL 1 SEPIAL 2 PRINTER S-VGA VIDEO(DIGITAL) AUDIO (AES/EBU) SCSI AUDIO SCSI VIDEO 1 SCSI VIDEO 2 SCSI VIDEO 3 CONTROL 1...
-
Page 15: Monitor Connection
Monitor Connection Computer Display Connection Connect the S-VGA Connector of this unit with the computer display. The usable computer display is shown in the following. Resolution 1024 x 768 dot Horizontal Scanning Frequency 48 kHz Vertical Scanning Frequency 60 Hz Cable with 15-pin Connector S-VGA SEPIAL 2... - Page 16 VCR Connection DVCPRO VCR 2-conductor Shielded Cable Coaxial Cable (with XLR-3-12C Connector) (with BNC Connector) ADV REF Output AUDIO OUT (AES/EBU) VIDEO OUT (P VIDEO OUT (P VIDEO OUT (Y) VIDEO OUT (DIGITAL) AUDIO OUT (R) AUDIO OUT (L) TC (LTC) Output DVCPRO VCR MOUSE SEPIAL 1...
- Page 17 S-VHS VCR RCA Pin-plug Cable AUDIO OUT (R) AUDIO OUT (L) S-Video Cable VIDEO OUT (Y/C) MOUSE SEPIAL 1 SEPIAL 2 PRINTER S-VGA VIDEO(DIGITAL) AUDIO (AES/EBU) SCSI AUDIO SCSI VIDEO 1 SCSI VIDEO 2 SCSI VIDEO 3 CONTROL 1 CONTROL 2 JOG PAD SEE MANUAL ADV REF...
- Page 18 Powered Speaker, Cassette Tape Recorder or CD Player Connection RCA Pin-plug Cable Powered Speakers AUDIO OUT 1 (R) AUDIO OUT 1 (L) MOUSE SEPIAL 1 SEPIAL 2 PRINTER S-VGA Cassette Player VIDEO(DIGITAL) AUDIO (AES/EBU) SCSI AUDIO SCSI VIDEO 1 SCSI VIDEO 2 SCSI VIDEO 3 CONTROL 1 CONTROL 2...
-
Page 19: Powering Main Unit On And Off
The power indicator of the HDD-BOX lights red. 2. Turn on the power of this unit. The Power Indicator of this unit lights and the system is activated. POWER / HDD Nonlinear AV Workstation AY-NE2000 Power Indicator/HDD Indicator Power On/Off Switch Power Off Caution:... -
Page 20: Operating Procedures
OPERATING PROCEDURES Refer to the User’s Manual or Reference Manual for more details. Starting the System 1. Turn on the power of the peripheral equipment in the system. 2. Then turn on the Main Unit. The system starts and the initial window (Tool Box, Bin Manager or Bin Window) appears on the Computer Display. Computer Display is shown below. - Page 21 Panasonic dealer. 10. Select “NTSC [English]” and click “Continue”. The Hardware dialog panel is displayed. Installing Fonts Click “WJ-HX1000/AY-NE2000 Series”. 11.Click “Continue”. 1. Turn on the Main Unit. The startup dialog panel is displayed. The application program starts up.
- Page 22 Device Setting Refer to the Reference Manual of AY-AS2000 for more details. 5. In case that there is not VCR name that you use, in 1. Double click “Special” in the Tool Box. 2. Double click “Device” in the Setup Panel. the Device Type area, click “Add”.
- Page 23 Operation Confirmation Red Display • Click on “Add to chain as Newdisk” for logical for- matting. Refer to the Reference Manual for the AVHDD Mainte- nance tools. Caution: • It is important to make a back-up copy of HDDs, and 1.
-
Page 24: Adjustment
ADJUSTMENT Gen-lock Adjustment 1. Connect the oscilloscope, vector scope and signal generator with the Main unit AY-NE2000. Phase adjustments must be performed by using the The reference signal is supplied from the signal gen- switches inside the Front Panel when external synchro- erator. - Page 25 Color Phase Control Install the Front Panel The sub-carrier can be adjusted by using the SW1 and After the above adjustments, install the front panel as VR1. shown below. 1. Turn the SW1 to clockwise; 0°, 90°, 180°, 270° Front Panel Unit Screws Turn the SW1 to counterclockwise;...
-
Page 26: Add System Memory
ADD SYSTEM MEMORY The system memory should be as follows: Memory board installed in DIMM Slot 1 (1) Factory Setup Type 168-pin DIMM type DIMM1 32MB Memory Type SDRAM DIMM2 not used Memory Capacity 32MB, 64MB, 128MB DIMM3 not used Power Voltage 3.3V Total... -
Page 27: Specifications
SPECIFICATIONS Video Video Input [Analog] Input Connectors: 2 sources (selectable from Composite. Y/C, Y/P 1.0 V[p-p]/75 Ω (BNC) Composite: 1.0V[p-p]/75 Ω Y /C: 0.286 V[p-p]/75 Ω (Y/C terminal) 1.0V[p-p]/75 Ω (BNC) Component: : 0.486V[p-p] or 0.7V[p-p], 75 Ω (BNC) (Setup 7.5 IRE) [SDI (Option)] SMPTE259M 75 Ω... - Page 28 Floppy Disk Drive: 1.44MB x1 ZIP Drive: 100MB x1 CD-ROM Drive: x32 Speed Card Slot: PCI x3 (supplied by Panasonic only) SVGA connector: 15 pinx1 (D-Shell, female), 1024x768 dots, 256 colors, Scanning: 48kHz (horizontal), 60 Hz (vertical) Parallel connector: 25 pin x1 (D-Shell, female)
- Page 29 Audio Performance S/N Ratio: More than 70dB (1kHz, XLR OUT) Dynamic Range: More than 88dB Total Harmonic Distortion: 0.05% (1kHz) 20kHz, +0, −3dB, 20Hz, +0, −3dB Frequency Response: Sampling Frequency: 48kHz, 16 bit Mixing: Stereo 4 channels Effector: EQ, Reverberation Recording Time: Approx.
- Page 30 Memo...
- Page 31 Memo...
- Page 32 Executive Office: 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323)436-3500 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201)348-7621 Mid-Atlantic: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201)348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160 Suwanee, GA 30024...