2.5.1 Set Automatic Recording
To enable the recording to start automatically after you turn on the
power, do the following:
1.
Press the
OSD menu.
2.
Press the
Automatic Record and press the
button.
3.
Press the
button.
4.
Press the
2.5.2 Set the Date and Time
To set the correct date and time, do the following:
1.
Press the
2.
Press the
button.
3.
Press the
the value and press the
to move to another field.
4.
Repeat step 3 until the date and time
setting is complete.
Note:
1.When the battery is drained dry and the satellite synchronization is off, the user must
reset the date/time before the function-automatic record is started. If the user doesn't
reset the date/time, the device will give you alert (you can see
attached) after one minute and the automatic record will be started .
2.But if the sattlelite is synchronized ,the device can do automatic record immediately.
button to enter the
/
button to select
/
button to select On and press the
button to exit the menu.
button to enter the OSD menu.
/
button to select Date / Time and press the
/
button to adjust
button
the as
19