Basic Menu Operation - Koden GTD-110 Operation Manual

Chapter 6
Using the menu
GPS MONITOR
DRAWING DRAWING
DRAWING
EDIT
DRAWING ERASE
DRAWING RECALL
TRACK COLOR SETTING
OTHER SHIP'S PLOT SETTINGS
USER C-CARD
NEAREST PORT
MAINTENANCE

6. 1. 1 Basic menu operation

(1) Press the MENU key to display the menu.
(2) Move the Joystick up or down to select a menu
item.
(3) Press the Joystick to the right to enter a sub
setting menu.
(4) Select or set up the setting item in the sub menu.
6-2
To monitor GPS reception and health status
To create a boundary line, dangerous zone, etc. by
combining lines.
MOVEMENT
CURSOR/
VALUE
ADDITION
ERASE
To erase drawings created by the user
Turning drawings on and off
Setting track color (Normal or Water temperature)
Setting other ship's data
STORE To save the data into the User C-Card
RECALL To recall the data from the User C-Card
ERASE To cancel the data stored in the User C-Card
FORMAT To format the User C-Card
To view the Nearest port info
SIMULATION To perform a simulated plotting function
SYSTEM TEST Operation test
COLOR PALETTE
To select and adjust the color tone
OPERATION
DATA Communication with another GTD-110/150 unit in terms
COMMUNICATION of mark data, etc
FLASH ROM To erase data stored in the Flash ROM (Read Only
ERASE Memory)
LANGUAGE To change the language
GTD-110/150
To move the node of a drawing using the
cursor or the values (lat/lon or LOP)
To add the node of a drawing using the
cursor or the values (lat/lon or LOP)
To erase the node of a drawing using the
cursor or the values (lat/lon or LOP)
Figure 6.1 Main Menu
0093151542-06