Data And Software Management; Data Mover - Nokia 9300i User Manual

Data and software management

Your smartphone offers you several applications for
managing your personal data, such as contacts and
calendar information and e-mail.

Data mover

You can use Data mover
contacts and settings, from your Nokia 9200 series
Communicator to your Nokia 9300i with infrared or a
memory card. Before you start, make sure that there is
enough free memory in your devices or memory card for
the move. Note that if there is less than 2 MB of free
memory in the Nokia 9300i , you cannot move any data.
Do not use the Nokia 9300i when using Data mover. If
possible, switch off the cover phone. Make sure you have
enough battery power, or connect the device to a charger.
Note: Before you use an existing compatible
memory card with your Nokia 9300i, you must convert
the memory card with Data mover and reinstall the
applications that you previously installed to the memory
card. However, do not reinstall any pre-installed
applications for the Nokia 9210 Communicator. Your
Nokia 9300i contains a later version of these applications,
and these later versions must be used with Nokia 9300i.
There may be additional steps, depending on the type of
data that you want to move, the method you want to use
to move the data, the amount of free memory on your
devices or memory card, or the number of successful or
100
to move certain data, such as
unsuccessful data moves you have made previously. Make
sure that the infrared ports of the devices are facing each
other.
Always read the instructions that Data mover provides on
the display.
1. Go to Desk Tools Data
> >
a memory card, insert it to your Nokia 9200 series
Communicator. Press Continue
2. Select your current city and country, and press OK.
3. Activate infrared in both devices, make sure that the
infrared ports of the devices are facing each other, and
press Continue. An infrared connection is established
between the devices.
4. Press Send data collector
Nokia 9200 series Communicator. Data collector is
sent as an infrared message to the Inbox in your Nokia
9200 series Communicator. To install Data collector,
press Open in the 9200 series Communicator. If
is not available, press Save
and open it from File manager. Data collector starts
automatically after installation. Control the rest of the
data move process with the Nokia 9300i. After Data
collector is installed,, press
Nokia 9300i.
5. In the Nokia 9300i, select the data you want to move
from your Nokia 9200 series Communicator. You can
move calendar and contact information, messages,
settings, documents, and images. Some files, such as
mover. If there is data on
transfer.
to send Data collector to your
Open
to save the installation file,
Connect data coll. in the