Acquiring GPS Signals † The first time you turn on DNX520VBT, you must wait while the system acquires satellite signals for the first ..1 time. This process could take up to several minutes.
Page 3
¤ • This unit has the cooling fan to decrease the internal temperature. Do not mount the unit in a place where the • Mounting and wiring this product requires skills and cooling fan of the unit are blocked. Blocking these openings experience.
Page 4
Mute control wire (Brown) Connect to the terminal that is grounded when either the telephone rings or during conversation. ⁄ To connect the Kenwood navigation system, consult your navigation manual. Power control/ Motor antenna control wire (Blue/White) Connect either to the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle.
Installing the GPS Antenna Installing the Microphone Unit GPS antenna is installed inside of the car. It should 1. Check the installation position of the microphone be installed as horizontally as possible to allow easy (accessory 2). reception of the GPS satellite signals. 2.
Need help?
Do you have a question about the DNX520VBT and is the answer not in the manual?
Questions and answers