NETGEAR C6300 User Manual page 80
Ac1750 wifi cable modem router
Hide thumbs
Also See for C6300:
- Installation manual ,
- User manual (102 pages) ,
- Quick start quide (2 pages)
Table of Contents
Advertisement
Note:
Be sure to change the modem router login password to a secure
password. The ideal password contains no dictionary words from any
language and contains uppercase and lowercase letters, numbers,
and symbols. It can be up to 30 characters. See
Password
To set up remote management:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type http://routerlogin.net or http://192.168.0.1.
A login screen displays.
3.
Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Advanced Setup > Remote Management.
5.
Select the Turn Remote Management On check box.
6.
Under Allow Remote Access By, specify the external IP addresses to be allowed to access
the modem router's remote management.
For enhanced security, restrict access to as few external IP addresses as practical.
Select one of the following:
•
Only This Computer. Enter the IP address that will be allowed access.
•
IP Address Range. Enter a beginning IP address and an ending IP address.
•
Everyone. Allows access from any IP address on the Internet.
7.
Specify the port number for accessing the web management interface.
AC1750 WiFi Cable Modem Router
on page 74.
Manage Your Network
80
Change the admin
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the C6300 and is the answer not in the manual?
Questions and answers
portfowarding Ip camera how do I do it?
To set up port forwarding for an IP camera on a NETGEAR C6300:
1. Determine the Camera's IP Address: Find the local IP address of the camera. Ensure it has a static IP or use the reserved IP address feature in the router.
2. Access the Router Settings: Open a web browser, enter the router’s IP address (typically 192.168.0.1 or 192.168.1.1), and log in with the admin credentials.
3. Navigate to Port Forwarding: Go to the router’s port forwarding settings.
4. Create a Port Forwarding Rule:
- Enter a name for the rule (e.g., "IP Camera").
- Input the camera’s local IP address.
- Specify the required ports (e.g., HTTP port 80 or a custom port used by the camera).
- Select the appropriate protocol (TCP, UDP, or both).
5. Save and Apply Changes: Save the settings and restart the router if necessary.
6. Access the Camera Remotely: Use the public IP address of your network and the specified port to view the camera from outside your home network.
Ensure your firewall settings allow the connection, and consider using a dynamic DNS service if your public IP address changes frequently.
This answer is automatically generated