JetStar 39 Series Installation And Operation Instructions Manual

JetStar 39 Series Installation And Operation Instructions Manual

Counter popcorn popper

Advertisement

JetStar
®
COUNTER
POPCORN POPPER
MODEL
39 & 86 Series
Installation and
Operation
Instructions
2M-Y8397 Rev. O 7/12/10
86-S


Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 39 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for JetStar 39 Series

  • Page 1 JetStar ® COUNTER POPCORN POPPER MODEL 39 & 86 Series Installation and Operation Instructions 2M-Y8397 Rev. O 7/12/10 86-S...
  • Page 3: Specifications

    SPECIFICATIONS: 39 SERIES Capacity: 5 one ounce servings per hour Electrical: 0 volt, 97 watts, 9.98 amps 0 volt, 97 watts, 5.0 amps Cord Length - 6 ft. Plug NEMA Spec - NEMA 5-5P (0V Models) CEE7-7 (0V Models) Dimensions: Weight lbs. (kg) 9-A - Yellow 9 /" W x 4-/4" D x 5 /8" H Installed (0.4) (49.5 cm W x 6. cm D x 6.8 cm H) Shipping (5.4) 9D-A - Wood Grain " W x 4-/4" D x 5 /8" H Installed (0.4) (5. cm W x 6. cm D x 6.8 cm H) Shipping (5.4) 9R-A - Antique 9 /" W x 4-/4" D x 5 /8" H Installed (0.4) (49.5 cm W x 6. cm D x 6.8 cm H) Shipping (5.4) 9S-A - Stainless Steel 9 /" W x 4-/4" D x 5 /8" H Installed (0.4)
  • Page 4: General Installation Instructions

    This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations. For equipment to be used by the general public, please contact the factory. CAUTION Before using your new equipment, read and understand all the instructions & labels associated with the unit prior to putting it into operation. Make sure all people associated with its use understand the units operation & safety before they use the unit. All shipping containers should be checked for freight damage both visible and concealed. This unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If equipment is received in damaged condition, either apparent or concealed, a claim must be made with the delivering carrier. Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a request for inspection of concealed damage must be made with carrier within 5 days. Be certain to retain all contents plus external and internal packaging materials for inspection. The carrier will make an inspection and will supply necessary claim forms. GENERAL INSTALLATION INSTRUCTIONS Each machine has been properly wired and inspected at the factory for operation on the voltage and type of current specified on the nameplate. WARNING DO NOT CONNECT TO ANY OTHER TYPE OF CURRENT OR THE MACHINE WILL BE SERIOUSLY DAMAGED. 120 VOLT MACHINES Machines with a nameplate stamped 0V are equipped for operation on 0 volt 60 hertz AC single phase service and must be connected to a  wire grounded, polarized receptacle.
  • Page 5: Maintenance And Repairs

    KEEPING THE POPPING UNIT CLEAN After each popping period, wipe the inside and outside of the kettle while it is warm (not hot) with a clean cloth. This is important to keep salt, seasoning, oil from forming a carbonized material which not only lowers popping efficiency but can cause excessive smoking or damage the kettle. For retaining the high luster on the stainless steel kettle shell and lids, use a non-abrasive standard stainless steel cleaner when the kettle is cold. Use a damp cloth and a warm mild soap solution to clean the clear glass and plastic surfaces. TO REMOVE KETTLE: Allow kettle to cool or use heat insulated gloves to remove a hot kettle. Turn off the kettle switch. Disconnect the twist lock cap at the end of the kettle conduit, turn kettle handle clockwise 90 degrees to unlatch the kettle. Remove the hitch pin clip from the kettle hinge pin, hold the kettle and pull out the hinge pin. The kettle can now be removed from the unit. Do not place the kettle in water as this will damage the electrical assembly. MAINTENANCE AND REPAIRS Contact the factory, a service representative or a local service company for service or required maintenance.
  • Page 6 On all shipments outside the United States and Canada, see International Warranty. The warranty period for the JetStar six (6) ounce & Super JetStar eight (8) ounce series popcorn machines is two (2) years. The warranty period for the Chrome-Max Griddles is  ve (5) years on the griddle surface. See detailed warranty provided with unit.
  • Page 10 NOTE: SEE DRAWING SK2135 FOR KETTLE ASSY. SOME ITEMS ARE INCLUDED FOR ILLUSTRATIVE PURPOSES ONLY AND IN CERTAIN INSTANCES MAY NOT BE AVAILABLE STAR MANUFACTURING INTERNATIONAL, INC. MODEL - 39-A & 86S, 120V/230CE SK1359 REV. G 7/22/05...
  • Page 11 SOME ITEMS ARE INCLUDED FOR ILLUSTRATIVE PURPOSES ONLY AND IN CERTAIN INSTANCES MAY NOT BE AVAILABLE STAR MANUFACTURING INTERNATIONAL, INC. MODEL - 39-A & 86S, KETTLE ASSY SK2135 REV. C 11/2/07...
  • Page 12: Parts List

    PARTS LIST July , 00, Rev O 9A, 9D-A, 9S-A, 9S-AS 9R-A, 9S-GWP 6 oz. Popcorn Popper 86S, 86SS 8 oz. Popcorn Popper MODEL Number Part Number Description and Model Designation Number Unit C-T085 TOP - YELLOW 9-A C-T086 TOP - SPOTWELDED, STAINLESS STEEL 9S-A, 9S-AS, 86S, 86SS C-T087 TOP - WOODGRAIN 9D-A C-T09 TOP - RED 9R-A M-Y7447 SIGN DISPLAY-OLD STYLE 9D-A M-Y964 SIGN DISPLAY 9S-GWP M-Z055 SIGN DISPLAY 9A, 9S-A, 86S, 86SS M-Y864 SIGN DISPLAY 9R-A M-Z0090 LABEL-SWITCHES E-Y644 SWITCH- (96700 : BELOW) E-Z009...
  • Page 13 PARTS LIST July , 00, Rev O 9A, 9D-A, 9S-A, 9S-AS, 9R-A, 9S-GWP 6 oz. Popcorn Popper 86S, 86SS 8 oz. Popcorn Popper MODEL Number Part Number Description and Model Designation Number Unit I-Y744 CHANNEL GLASS (SIDE-TOP & BOTTOM) ALL EXCEPT 9D-A I-Y794 CHANNEL GLASS (UPRIGHT) 9D-A I-Y744 CHANNEL GLASS (UPRIGHT) 9R-A, 9A, 9S-A, 9S-GWP I-Z060 CHANNEL GLASS (UPRIGHT) 86S, 86SS I-Y795 CHANNEL GLASS (FRONT-TOP & BOTTOM) 9D-A I-Y7444 CHANNEL GLASS (FRONT-TOP & BOTTOM) ALL EXCEPT 9D-A C-860 RETAINER-GLASS Q-Y77 GLASS-SIDE (/8" x -5/8" x 0-/8") 9S-A, 9A, 9R-A, 9D-A Q-Z06 GLASS-SIDE (/8" x -/8" x 5-/8") 86S, 86SS Q-Y77 GLASS-FRONT (/8" x 7-/8" x 0-/8") 9S-A, 9A, 9R-A, 9D-A...
  • Page 14 PARTS LIST July , 00, Rev O 9A, 9D-A, 9S-A, 9S-AS, 9R-A, 9S-GWP 6 oz. Popcorn Popper 86S, 86SS 8 oz. Popcorn Popper MODEL Number Part Description Number Number Unit C-908-PS KETTLE ASSEMBLY-LINER C-979 PLATE HEAT SINK ASSEMBLY N-Y74 ELEMENT 000W 0V 4.4 ohms N-Y744 ELEMENT 000W 0CE T-Y74 THERMOSTAT 0V T-Y945 THERMOSTAT 0CE C-Y76 CHANNEL-HOLDER ELEMENT C-Y748 SPACER H-Y769 INSULATION PAD C-Y760 KETTLE SHELL C-Y76 LUG (0V) PS-G499 HIGH LIMIT PARTS KIT., 9/86 T-Z08 RESETTABLE THERMOSTAT HIGH LIMIT 0V, mfg. after 9/007 C-87 WASHER #0 EXT STL C-560...
  • Page 16 STAR INTERNATIONAL HOLDINGS INC. COMPANY Star - Holman - Lang - Wells - Bloomfield - Toastmaster 10 Sunnen Drive, St. Louis, MO 63143 U.S.A. (800) 807-9054 (314) 781-2777 Parts & Service (800) 807-9054 www.star-mfg.com...

This manual is also suitable for:

86 series

Table of Contents