Warning: When going down a kerb, the front castors must be
raised to prevent the occupant from falling out. The above are
only recommendations and may not be suitable for all events.
8. USING THE WHEELCHAIR IN A VEHICLE
Under no circumstances should the wheelchair be used as a
seat in a motor vehicle. The wheelchair occupant should transfer
to a normal vehicle seat and the wheelchair should be safely
stored away.
The wheelchair has not been designed to be used as a seat in a
motor vehicle, and failure to follow the above instructions could
result in injury.
9. TYRE PRESSURE AND INFLATION
This Enigma wheelchair comes complete with pneumatic tyres.
The tyres should be inflated with a manually operated pump and
use a standard car tyre air valve. Note that under no
circumstances should a powered or compressed air pump be
used. For optimum performance, the tyres should be inflated to
the following maximum pressures:
•
65psi (4.5bar) for 24" self propel wheels
•
40psi (2.8bar) for 12½" transit wheels
The Enigma wheelchair range is also available with solid tyres
and mag wheels. For more information, please contact your
local dealer.
Enigma Standard Aluminium Wheelchair
Page 9 of 12
10. SPECIFICATION
Dimensions *1
Dimensions *2
(L x W x H)
Seat
(W x D x H)
Wheel Spacing
Weight * 1
Weight * 2
Max User Mass
All dimensions are based on the wheelchair in its default configuration.
Dimensions * 1 refers the wheelchair assembled
Dimensions *2 refers to the wheelchair folded and parts removed
Weight *1 is the total weight
Weight *2 is the weight without removable components
Owners Handbook
Enigma Standard Aluminium Wheelchair
Part Code: Z17999
Page 10 of 12
XSAWCSP18
103cm x 63cm x 93cm
(L x W x H)
40" x 25" x 37"
83cm x 26cm x 63cm
33" x 10" x 25"
45cm x 42xm x 52cm
18" x 17" x 20½"
43cm – 51cm /17" – 20"
16.8kg / 37lb
8.3kg / 18lb
115kg / 18st
XSAWCTS18
92cm x 63cm x 93cm
37" x 25" 37"
83cm x 26cm x 63cm
33" x 10" x 25"
45cm x 42xm x 52cm
18" x 17" x 20½"
43cm – 51cm / 17" – 20"
14.7kg / 32lb
8.3kg / 18lb
115kg / 18st
Owners Handbook
Part Code: Z17999
Need help?
Do you have a question about the ENIGMA STANDARD and is the answer not in the manual?
Questions and answers