Advertisement
Quick Links
Advertisement
Related Manuals for Hirobo X.R.B. Lama
Summary of Contents for Hirobo X.R.B. Lama
- Page 1 INDOOR FLIGHT HELICOPTER Service Manual...
- Page 2 Confirm the contents. Questionnaire Instruction Controller manual Spare main blades * Three sets of upper and lower blades are included. Tool (driver and L-wrench) AC adapter Safety skid hub Safety skid...
-
Page 3: Operation
Operation check Confirm the blade attachment screw. * Completely fasten the M2 x 8PH screw and M2 nylon nut, and then loosen them 0.5 to 1 turn. * At this time, make sure that the blade can be slightly dragged. M2X8PH Set the trim on the controller to the neutral position to turn on power. -
Page 4: Flight Adjustment
Flight adjustment Tracking and rudder Is tracking set correctly? * There is no problem if the two blades overlap and are flush with each other. * If both blades are visible, carry out adjustment in accordance with page 20 of the Users Manual. Adjust the rudder sub trim so as to turn off the rudder LED of Needs adjustment... - Page 5 Flight adjustment Adjustment of aileron and elevator sub trims * To adjust respective sub trims, limit the trimmer rotation within 0.5 to 1 degree. Aileron and elevator * After adjustments of the aileron and elevator are carried out, confirm the rudder again.
- Page 6 Flight Is there any vibration or "MISOSURI" (circular hovering motion)? adjustment * Release the fuselage from hands in the air and observe it for a while. * The fuselage must remains stationary for a while. * Much of the vibrating can be solved by changing blades. Vibration and MISOSURI Are blades balanced? * Replacing blades is easier than balancing blades.
Need help?
Do you have a question about the X.R.B. Lama and is the answer not in the manual?
Questions and answers