Replacing.the.batteries.in.your.remote.control - Sky my hdi User Manual

Extra information
Replacing the batteries in your remote control
❖
When the batteries in your remote control are running low, the following
message will appear on your TV screen.
To remove the message, press back (
batteries as soon as possible. You may also see a 'low battery' symbol in
the i-search banner (see right).
To replace the batteries, insert two AA batteries as follows:
1. Hold the upper, silver part, of your SKY remote control in one hand.
With your other hand, push the catch on the battery cover upwards
and remove the cover by pulling it outwards.
2. Remove the old batteries.
3. Insert the new batteries. Be sure to match the + and – marks on the
batteries to their respective marks inside the battery compartment.
4. Replace the battery cover, by inserting the two tabs at the top of the
cover first, then pushing the cover into place.
Don't leave flat batteries in your remote control.
8
Replace both batteries at the same time.
4
Dispose of flat batteries in an environmentally-friendly way.
4
), then make sure you replace the
Low-battery
symbol