Setup; Osc Section - SoundCraft Vi1 User Manual

SETUP

[SETUP] opens the configuration page, which contains the central oscillator and the Talkback Send and
Talk Back return configuration of the Soundcraft Vi1™

OSC Section

HINT: The oscillator can also be patched to the Input Channels by using the {OSC} key in the Input Chan-
nel VST screen.
<PINK NOISE>
Sets the waveform to pink noise.
<WHITE NOISE>
Sets the waveform to white noise.
<SINE>
Sets the waveform to sine.
<OSC to BUS>
Feeds the Oscillator to the preconfigured Busses, which are selected in the Bus Assign page.
<OSC to TB>
The oscillator signal is routed to the TB Bus and replaces the TB signal.
GAIN field
Encoder adjusts the oscillator level in the Range – inf to +18 dB. {ON} enables the oscillator.
FREQ field
If the oscillator is set to SINE the Encoder adjusts the Frequency in the range 20 Hz – 20kHz.
BUS ASSIGN field
Its {VST config button} opens the Buss Assign page.
OSC OUT field
Its {VST config button} opens the output patch configuration page
Page 12 - 2 Soundcraft Vi1™ User Guide Issue 0810