Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Omax M82ES Series
Summary of Contents for Omax M82ES Series
-
Page 1: User Manual
User Manual Binocular Compound Microscope Model: M82ES Series MicroscopeNet.com... -
Page 2: Table Of Contents
Table of Contents i. Caution……..……………………………………………………………1 ii. Care and Maintenance……….………………………………….….…2 1. Component Illustration………………………….…………………..…3 2. Installation…………………….………………………….…………..4 3. Operation…………………….………………………….…………..5 4. Specifications…………………….……………………………………..8 5. Optional Parts………….………………………….………………..9 6. Troubleshooting Guide…...............10 7. Dry Darkfield Condenser Installation & Operation Instruction…….11... -
Page 3: Caution
www.microscopenet.com i. Caution 1. Open the carton carefully with a knife or paper cutter. Find the “UP” sign and place the Styrofoam container on the side that makes the arrow upward. If the “UP” sign is missing, please open the Styrofoam container gently to prevent any accessory, i.e. -
Page 4: Care And Maintenance
www.microscopenet.com ii. Care and Maintenance 1. Do not attempt to disassemble any component including eyepieces, objectives or focusing assembly. 2. Keep the instrument clean; remove dirt and debris regularly. Accumulated dirt on metal surfaces should be cleaned with a damp cloth. More persistent dirt should be removed using a mild soap solution. -
Page 5: Component Illustration
www.microscopenet.com 1 Components Illustration Eyepiece WF10X Focusing Rack Stop Screw Diopter Adjusting Ring Coarse Focus Knob Eyepiece Tube Fine Focus Knob Nosepiece X-Y Stage Moving Knobs Objective Power Switch Slide Holder Brightness Intensity Dial Mechanical Stage Immersion Oil Light Collector Dust Cover Microscope Base Condenser Lock Thumb Screw... -
Page 6: Installation
www.microscopenet.com 2 Installation Head Lock Thumb Screw 2.1 Installation of the binocular viewing head 1) Loosen the head lock thumb screw (Fig. 1) on the top of the microscope body. Note: The thumb screw may not be pre-installed. Please find it in the same package of the microscope. 2) Remove the cap on the circular dovetail of the Fig. -
Page 7: Operation
www.microscopenet.com color and shape from the one in the figure, depending on the model purchased. 2.5 Installation of the dry darkfield condenser (optional, may not included in your package) See section 7 (Dry Darkfield Condenser Installation & Operation Instruction 3 Operation 3.1 Adjusting illumination 1) Plug the power cord into the power socket on the microscope and connect it to the power outlet. -
Page 8: Focusing
www.microscopenet.com 3.5 Focusing 1) With the 10x objective in position, raise the mechanical stage using the coarse focus knob until the specimen is close to the objective Focusing Rack Stop Screw 2) Turn the coarse focus knob until the specimen is in focus. - Page 9 www.microscopenet.com After observing the specimen with the 100X objective, clean the 100X objective lens first. 3.7 Adjusting condenser 1) Turn the condenser focus knob to raise or lower the condenser. 2) Raise the condenser when using high power objectives and lower it when using low power objectives.
-
Page 10: Specifications
4 Specifications General Model M82ES series Total Magnification 40X, 80X, 100X, 200X, 400X, 800X, 1000X, 2000X Viewing Head Binocular, inclined 45º , swiveling 360º Interpupillary Distance Sliding adjustment, 2-3/16” ~ 2-15/16” (55mm ~ 75mm) Diopter Adjustment On both eyepiece tubes... -
Page 11: Optional Parts
www.microscopenet.com Eyepieces Designation Magnification Field of View Mount Size 23.2mm Wide Field 18mm 23.2mm Wide Field 10mm Magnifications Eyepiece Objective 100X Magnification 100X 200X 400X 800X 1000X 2000X 5 Optional Parts (The optional parts may be included in some models or sold separately.) 1) Darkfield Condensers Darkfield Numerical... -
Page 12: Troubleshooting Guide
www.microscopenet.com 6 Troubleshooting Guide Problem Cause Solution No electrical power Check power cord connection Lamp does not light when switched on LED or power unit dead Contact seller for service Revolve the nosepiece to click-stop Revolving nosepiece not in click stop Darkness at the periphery position by swinging the objective correctly position... -
Page 13: Dry Darkfield Condenser Installation & Operation Instruction
www.microscopenet.com 7 Dry Darkfield Condenser Installation & Operation Instruction Condenser Lock Condenser Holder 1) Mounting the dry darkfield condenser Thumb Screw Rotate the nosepiece and set the 4x objective in position. Loosen and raise the focusing rack stop screw to the highest position.
Need help?
Do you have a question about the M82ES Series and is the answer not in the manual?
Questions and answers