1. Manuals
  2. Brands
  3. SuperLogics Manuals
  4. Touch Panel
  5. SL-PPC-174P4T
  6. User manual

SuperLogics SL-PPC-174P4T User Manual

Pentium 4 processor-based panel pc with 17" tft-lcd
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SL-PPC-174P4T
Pentium® 4 processor-based
panel PC with 17" TFT-LCD
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SL-PPC-174P4T and is the answer not in the manual?

Questions and answers

Related Manuals for SuperLogics SL-PPC-174P4T

Summary of Contents for SuperLogics SL-PPC-174P4T

  • Page 1 SL-PPC-174P4T Pentium® 4 processor-based panel PC with 17" TFT-LCD User’s Manual...
  • Page 2 SMI is a trademark of Silicon Motion, Inc. Creative is a trademark of Creative Technology LTD. All other product names or trademarks are properties of their respective owners. For more information on this and other SuperLogics products, please visit our websites at: http://www.SuperLogics.com http://www.SuperLogics.com/ppc For technical support and service, please visit our support website at: http://support.SuperLogics.com...
  • Page 3 FCC Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence when the equipment is operated in a residential environment.

  • Page 4: Packing List

    Packing List Before you begin installing your card, please make sure that the following materials have been shipped: • SL-PPC-174P4T series panel PC • User's manual • Accessories for SL-PPC-174P4T - Power cord (1.8 m) - USA type (other types are available on request) - Floppy disk with CD-ROM drive driver - "Drivers and Utilities"...

  • Page 5: Contact Information

    Additional Information and Assistance Step 1. Visit the SuperLogics web site at www.SuperLogics.com where you can find the latest information about the product. Step 2. Contact your distributor, sales representative, or SuperLogics' cus- tomer service center for technical support if you need additional assistance.

  • Page 6: Safety Instructions

    The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advan- tech disclaims all responsibility for the accuracy of any statements contained herein. SL-PPC-174P4T User’s Manual...
  • Page 7 Typ. Entsorgung gebrauchter Batterien navh Angaben des Herstellers. Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt 70dB(A) oder weiger. DISCLAIMER: This set of instructions is given according to IEC704-1. SuperLogics disclaims all responsibility for the accuracy of any statements contained herein.
  • Page 8 SL-PPC-174P4T User’s Manual viii...

  • Page 9: Table Of Contents

    Contents Chapter 1 General Information ........2 Introduction ............... 2 General specifications ............3 SL-PPC-174P4T LCD Specifications ......... 7 Dimensions................ 8 Chapter 2 System Setup...........10 A Quick Tour of the Panel PC ........10 Preparing for First-time Use..........12 Installation Procedures ............ 12 2.3.1...
  • Page 10 Table A.9:Front panel control connector (CN25)..41 A.10 IR connector (CN26)............41 Table A.10:IR connector (CN26) ......... 41 A.11 Fan power connector (FAN1 & FAN2) ......42 Appendix B Programming the Watchdog Timer .....44 Programming the Watchdog Timer......... 44 SL-PPC-174P4T User’s Manual...
  • Page 11 General Information This chapter gives background information on the SL-PPC-174P4T panel Sections include: • Introduction • General specifications • LCD specifications • Dimensions...

  • Page 12: Chapter 1 General Information

    Chapter 1 General Information 1.1 Introduction The SL-PPC-174P4T panel PC is a multimedia Pentium® 4 processor-based computer that is designed as a human machine interface (HMI) and desk- top computer. It is a PC-based system with 17" color TFT LCD display, on-board PCI Ethernet controller, multi-COM port interfaces and a 16-bit stereo audio controller.

  • Page 13: General Specifications

    1.2 General specifications General • Dimensions (W x H x D): 446 x 382 x127 mm (17.56"x15.04"x5") • Weight: 10.5 kg (23 lb) • Power supply: 200 watts Input voltage: 115 VAC / 4A ~ 230VAC / 2A @ 50 ~ 60 Hz Output voltage (Max.): +3.3V@16A, +5 V @ 12 A, +12 V @ 12 A, -12V@ 0.8A, +5VSB@2A •...
  • Page 14 • Chipset: Intel RC82540Em local bus Ethernet controller • Ethernet interface: Full compliance with IEEE 802.3u 100Base-T and 10 Base-T specifications. Includes software drivers and boot ROM 100/10Base-T auto-sensing capability • Wake-on-LAN: Supports wake-on-LAN function with ATX power control SL-PPC-174P4T User’s Manual...
  • Page 15 Touchscreen (optional) Type Analog Resistive Capacitive Resolution Continuous 1024 x 1024 4096 x 4096 Light Transmission Controller RS-232 RS-232 RS-232 interface interface interface Power +5 V @ +5 V @ +5 V @ Consumption 200 mA 100 mA 150 mA Software Supports DOS, Windows 3.1, Driver...
  • Page 16 • CF (Compact Flash) & Card Reader interface. Note: The PCMCIA driver of Windows 95 which includes a PCMCIA interface is available on the "Drivers and Utilities" CD-ROM of your SL-PPC-174P4T package. Environment • Temperature: 0 ~ 45° C (32 ~ 122° F) •...

  • Page 17: Sl-Ppc-174P4T Lcd Specifications

    1.3 SL-PPC-174P4T LCD S pecifications Display type: 17” TFT LCD Max. resolution: 1280 x 1024 Colors: 256 K or above Dot size (mm): 0.264 x 0.264 Viewing angle: 140° Luminance: 250 cd/m2 Temperature: 0 ~ 50° C Simultaneous mode: Yes...

  • Page 18: Dimensions

    1.4 Dimensions Units: mm Figure 1.1: Dimensions of the SL-PPC-174P4T SL-PPC-174P4T User’s Manual...
  • Page 19 System Setup This chapter details system setup on the SL-PPC-174P4T panel PC. Sections include: • A Quick Tour of the Panel PC • Preparing for First-time Use • Installation Procedures • Running the BIOS Setup Program • Installing System Software...

  • Page 20: Chapter 2 System Setup

    When you place the panel PC upright on the desktop, its front panel appears as shown in Figure 2-1. Figure 2.1: Front view of SL-PPC-174P4T panel PC SL-PPC-174P4T User’s Manual...
  • Page 21 When you look at the left side of the panel PC, you will see the floppy disk drive, CD-ROM drive and PCMCIA expansion sockets, as shown in Fig. 2-2. • Cardreader (optional) • CD-ROM eject button • CD-ROM activity light •...

  • Page 22: Preparing For First-Time Use

    Follow these procedures in order: Connect the female end of the power cord to the AC inlet of the panel PC. Connect the 3-pin male plug of the power cord to an electrical out- let. SL-PPC-174P4T User’s Manual...

  • Page 23: Connecting The Keyboard And Mouse

    2.3.2 Connecting the keyboard and mouse Connect the PS/2 mouse and keyboard port on the I/O section of the panel 2.3.3 Switch on the power Switch on the power switch on the rear cover. 2.4 Running the BIOS setup program Your panel PC is likely to have been properly set up and configured by your dealer prior to delivery.

  • Page 24: Installing The Drivers

    The various drivers and utilities in the CD-ROM disc have their own text files to help users install the drivers and understand their functions. These files are useful supplement to the information in this manual. The drivers and utilities used for the SL-PPC-174P4T Note: panel PCs ar bject to change without notice.
  • Page 25 845G Graphics Driver(VGA driver) ALC202 (Audio driver) Chipset Software (Chipset driver) ICH4 USB2.0 (USB2.0 driver) Intel LAN 6.2 (Ethernet driver) Touchscreen (Touchscreen driver) Chapter 2...
  • Page 26 SL-PPC-174P4T User’s Manual...
  • Page 27 Jumper settings and connectors This chapter describes how to set the panel PC hardware, and instructions on setting jumpers and connecting periph- erals, switches and indicators. Be sure to read all the safety precautions before you begin the installation procedures. Sections include: •...

  • Page 28: Chapter 3 Jumper Setting And Connectors

    2-3 A pair of needle-nose pliers may be helpful when working with jumpers. If you have any doubts about hardware configuration for your applica- tion, contact your local distributors or sales representatives before you make any changes. SL-PPC-174P4T User’s Manual...

  • Page 29: Jumpers And Switches

    Table 3.1: Jumpers and their functions Label Function FSB (Front Side Bus) setting LCD voltage setting Clear CMOS COM2 RS-232/422/485 setting COM1/COM2/COM3/COM4 pin 9 output type setting Panel type setting 3.1.3 Locations of jumpers Figure 3.1: Jumpers on the SL-PPC-174P4T motherboard Chapter 3...

  • Page 30: Connectors

    EIDE HDD connector (3.5î HDD) CN20 CD-ROM connector CN24 USB 5 / USB 6 connector CN25 Power control connector CN26 IR connector FAN1 CPU fan power connector FAN2 System fan power connector PCI1 PCI bus expansion slot SL-PPC-174P4T User’s Manual...

  • Page 31: Locations Of Connectors

    3.1.5 Locations of connectors Figure 3.2: Connectors on the SL-PPC-174P4T motherboard 3.2 CPU installation You can install an Intel® Pentium® III or Celeron™ CPU without setting any frequency ratio or voltage. Table 3.3: FSB setting (JP1) * Decided by CPU...

  • Page 32: Clear Cmos

    To avoid damaging the computer, always turn off the power supply before setting ìClear CMOSî. Set the jumper back to ìNormal operationî before turning on the power supply. Table 3.4: Clear CMOS/External RTC (JP3) *Normal Clear CMOS *Default setting SL-PPC-174P4T User’s Manual...

  • Page 33: Com-Port Interface

    3.4 COM-port interface The panel PC provides three serial ports (COM1, 3: RS-232; COM2: RS- 232/422/485) in one COM port connector. 3.4.1 COM2 RS-232/422/485 setting (JP4) COM2 can be configured to operate in RS-232, RS-422, or RS-485 mode. This is done via JP4. Table 3.5: COM2 RS-232/422/485 setting *RS-232 RS-422...

  • Page 34: Com1/Com2/Com3/ Pin 9 Output Setting (Jp5)

    3.5 VGA interface The panel PC's AGP VGA interface can drive conventional CRT dis- plays. It is also capable of driving a wide range of flat panel displays, including electroluminescent (EL), gas plasma, passive LCD and active LCD displays. SL-PPC-174P4T User’s Manual...

  • Page 35: Lcd Panel Power Setting

    3.5.1 LCD panel power setting The panel PC's AGP SVGA interface supports 5 V and 3.3 V LCD dis- plays. The LCD cable already has a built-in default setting. You do not need to adjust any jumper or switch to select the panel power. Table 3.7: LCD voltage setting (JP2) * Select 5V Select 3.3V...
  • Page 36 SL-PPC-174P4T User’s Manual...
  • Page 37 Hardware Installation and upgrading...

  • Page 38: Chapter 4 Hardware Installation And Upgrading

    The panel PC provides one 478-pin ZIF (Zero Inser- tion Force) socket (Socket 478). The CPU must come with an attached heat sink and CPU fan to prevent overheating. Warning! The CPU may be damaged if operated without a heat sink and a fan. SL-PPC-174P4T User’s Manual...
  • Page 39 Caution! Always disconnect the power cord from your panel PC when you are working on it. Do not make connections while the power is on as sen- sitive electronic components can be damaged by the sudden rush of power. Only experienced electronics personnel should open the panel PC.
  • Page 40 Move the bracket on the power supply to the original position and tighten the two screws. Figure 4.1: Figure 4.2: SL-PPC-174P4T User’s Manual...

  • Page 41: Installing The Ddr Sdram Memory Module

    Figure 4.3: 4.3 Installing the DDR SDRAM memory module You can install from 128 to 1024 MB of DDR SDRAM memory. The panel PC system provides two 184-pin DDR DIMM (Dual Inline Mem- ory Module) socket and supports 2.5 V DDR SDRAM. Detach and remove the metal rear cover.

  • Page 42: Installing The 3.5" Hard Disk Drive (Hdd)

    (shown in Fig. 5-6) Pull the lever in front of the HDD bracket out and insert the HDD bracket into HDD removable bay. (shown in Fig. 5-7) Press the lever down. (shown in Fig. 5-8) SL-PPC-174P4T User’s Manual...
  • Page 43 Put back the metal HDD cover and secure the two screws on it. Figure 4.5: Figure 4.6: Chapter 4...
  • Page 44 Figure 4.7: Figure 4.8: SL-PPC-174P4T User’s Manual...
  • Page 45 Pin Assignments...

  • Page 46: Appendix A Pin Assignments

    Appendix A Pin Assignments A.1 ATX Power connector 1 (CN1) Table A.1: AT Power connector 1 (CN1) Signal Signal 3.3V 3.3V 3.3V -12V PS-ON PW-OK 5VSB SL-PPC-174P4T User’s Manual...

  • Page 47: Atx Power Connector 2 (Cn2)

    A.2 ATX power connector 2 (CN2) Table A.2: ATX power connector 2 (CN2) Signal Signal A.3 LVDS connector 1(CN4) Table A.3: LVDS connector 1(CN4) Signal Signal RXIN2+ RXIN2- RXIN1+ RXIN3+ RXIN1- RXIN3- RXIN0+ CLK0+ RXIN0- CLK0- DDC_CLK DDC_DAT Appendix A...

  • Page 48: Lvds Connector 2(Cn6)

    Table A.4: Table B.4: LVDS connector 2 (CN6) Signal Signal RXIN6+ RXIN6- RXIN5+ CLK1+ RXIN5- CLK1- RXIN4+ RXIN7+ RXIN4- RXIN7- CONTRAST HPLG_DT A.5 Inverter power connector (CN5) Table A.5: Inverter power connector (CN5) Signal +12V ENABKL Brightness Adj. SL-PPC-174P4T User’s Manual...

  • Page 49: Fdd Connector (Cn10)

    A.6 FDD connector (CN10) Table A.6: FDD connector (CN10) Signal Signal Vcc(+5V) Step Index Vcc(+5V) Write data Drive select Vcc(+5V) Write enable Disk change Track 0 Write protect Motor on Read data Direction Density select Side 1 select Appendix A...

  • Page 50: Touchscreen Interface (Cn13)

    Signal Signal NRLSD NDSR NRTS NCTS NDTR MSDAT EXT MSDAT MSCLK EXT MSCLK A.8 Internal speaker connector (CN16) Table A.8: Internal speaker connector (CN16) Signal Speaker out_R - Speaker out_R + Speaker out_L + Speaker out_L - SL-PPC-174P4T User’s Manual...

  • Page 51: Front Panel Control Connector (Cn25)

    A.9 Front panel control connector (CN25) Table A.9: Front panel control connector (CN25) Signal Signal PWRLED(+) PWRLED(-) HDLED(+) HDLED(-) LACTLED(+) LACTLED(-) LINK100LED(+) LINK100LED(-) LINK1000LED(+) LINK1000LED(-) POWERSW(+) POWERSW(-) RESETSW(+) RESETSW(-) A.10 IR connector (CN26) Table A.10: IR connector (CN26) Signal IR_IN IR_OUT Appendix A...

  • Page 52: Fan Power Connector (Fan1 & Fan2)

    A.11 Fan power connector (FAN1 & FAN2) Table A.11: Fan power connector (FAN1 & FAN2) Signal +12V FAN_DET SL-PPC-174P4T User’s Manual...
  • Page 53 Programming the Watchdog Timer The SL-PPC-174P4T is equipped with a watchdog timer that resets the CPU or generates an interrupt if processing comes to a standstill for any reason. This feature ensures system reliability in industrial standalone or unmanned environments.

  • Page 54: Appendix B Programming The Watchdog Timer

    I/O port 440 (hex). The following example shows how you might program the watchdog timer : ;----------------------------------------------------------------------------------- ; Enter the extended function mode , interruptible double-write | ;----------------------------------------------------------------------------------- MOV DX,2EH MOV AL,87H OUT DX,AL OUT DX,AL SL-PPC-174P4T User’s Manual...
  • Page 55 ;----------------------------------------------------------------------------- ; Configurate logical device 8, configuration register CRF6 | ;----------------------------------------------------------------------------- MOV DX,2EH MOV AL,07H ; point to Logical Device Number Reg. OUT DX,AL MOV DX,2FH MOV AL,08H ; select logical device 8 OUT DX,AL MOV DX,2EH MOV AL,30H ;Set watch dog activate or inactivate OUT DX,AL MOV DX,2FH MOV AL,01H ;...
  • Page 56 ;------------------------------------------ ; Exit extended function mode | ;------------------------------------------ MOV DX,2EH MOV AL,AAH OUT DX,AL SL-PPC-174P4T User’s Manual...

Table of Contents