Lcd Keypads: Rxn-400/410 - Pima HUNTER-PRO 32 Installation Manual

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
36
3.10.1

LCD Keypads: RXN-400/410

Figure 16 - Connecting LCD keypad to control panel
PIMA's new keypads contain a tamper switch that "supervises" the keypads
connected to the system. In order to enable this feature:
1. Configure exactly the number of keypads connected to the system:
Short JP1 legs 1 and 2 on the keypad (see drawing 11).
RJ11- connecting
to the fast
programmer
(PRG-22) and
local programming
adaptor LCL-11A
JP1:
Programming
number of
keypads
Then, in the following programming
screen, enter desired number of
keypads (1 to 8):
To finish, short JP1 legs 2 and 3 (i.e. return the jumper).
2. Each of the keypads need be given a unique ID number.
PRO G RAM M ING
JP1
1
Figure 17 - LCD keypad without back cover
RXN-410
1 JAN 04
3
2
TAMPER
U1
TAMPER
TAMPER
4 IN
3 OUT
BUS
2+V -
1-V +
E n t e r
12:40
TAMPER
Terminal block
connection to
control panel
n e w I D : 1