Strong SRT_4669Z User Manual page 9

6.1 Getting Started
Blind Scan <Figure 6.1.10>
Select the satellites you want to search by pressing the
Press , / to set the "Polarization" and "Scan Mode" options.
- TP : Select TP Frequency
- Polarization : Select among All / Vertical / Horizontal
- Mode : Select among All / Free / TV
- SCAN : Begin channel search of the selected satellites.
<Figure 6.1.10>
Manual Scan <Figure 6.1.11>
Select a transponder.
To change a transponder's information (Frequency, Symbol Rate), use the
NUMERIC buttons.
To add a new transponder, press the GREEN button.
To delete a transponder, press the YELLOW button with the cursor next to the
Frequency parameter.
To search a transponder, set its different parameters and press
<Figure 6.1.11>
button on the remote.
.
16
6.1 Getting Started
Package Identifier (PID) Scan <Figure 6.1.12>
Select a transponder.
To change a transponder's information (Frequency, Symbol Rate), use the
NUMERIC buttons.
To add a new transponder, press the GREEN button.
To delete a transponder, press the YELLOW button with the cursor next to the
Frequency parameter.
To search a transponder, set its different parameters and press
search a specific channel of the transponder by setting its PID data (Video, Audio
and PCR).
<Figure 6.1.12>
Note : If you cannot access programs after correctly completing a scan procedure,
please contact your seller or your installer.
/ . You can
17