Table of Contents
Advertisement
ACE PLUS CORP.
Remote Control
Page 9 of 11
1.
Turn on/off all devices (ID) and channels (CH).
2.
ID selection mode. Press up or down arrow button
to select an ID. Once the ID selected matches the
ID of the EX-G048A, green LED lights.
3.
Channel selection mode. Press this button before
you would like to turn on/off any channel of a
particular device. Press left or right arrow button to
select an ID.
4.
Select 1st output channel (DVI-OUT 1)
5.
Select 2nd output channel (long line of the Y-cable)
6.
Select 3rd output channel ( short line of the
Y-cable)
7.
Turn on/off the selected EX-G048A.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: +886-2-2912-4201
FAX: +886-2-2912-3164
Website:
www.ace-plus.com
Advertisement
Table of Contents
