Do you have a question about the Industrial Door and is the answer not in the manual?
Questions and answers
Summary of Contents for BIRMINGHAM GARAGE & INDUSTRIAL DOORS Industrial Door
Page 1
UNITS 3,10 & 12 GRIFFIN INDUSTRIAL ESTATE PENNCRICKET LANE ROWLEY REGIS WEST MIDLANDS B65 0SN Tel: 0121 559 8666 Fax: 0121 561 1101 Web: www.bgid.co.uk OPERATING AND MAINTENANCE MANUAL SAFETY, SERVICE & REPAIR Industrial Door – Operating Manual Insert address here BGID.Doc.U12.020...
Page 2
PLEASE READ THIS INSTRUCTION BOOKLET PRIOR TO OPERATING YOUR INDUSTRIAL DOOR SHOULD YOU EXPERIENCE ANY DIFFICULTY PLEASE CONTACT OUR SERVICE DEPARTMENT NORMAL HOURS: 0121 559 8666 OUT OF HOURS EMERGENCY NUMBER: 07778 375310...
Page 3
Industrial Door Operating Instructions Roller Shutter Door Self Coiling (Push Up) TO OPEN: Release all locking mechanisms on the bottom rail, on the side, and elsewhere – lift the door curtain upwards in a controlled manner, to its full height, using a hook and pole where provided.
Electrically Operated TO OPEN: Press “Open” button on the central control station. The door curtain will automatically stop at the full opening height – unless the “Stop” button is pressed. TO CLOSE: Press “Close” button on the central control station. The door curtain will automatically stop when fully closed, or when the button is released.
Fire Roller Shutter Operating Instructions Self Coiling (Push Up) Fire Shutter Designed to close in the event of a fire. Not designed to be used on a regular basis, if however, the curtain is lowered for inspection or other purposes, it will be difficult to lift up refer to section “A” Hand Chain Operated Fire Shutter Designed to close in the event of a fire.
Page 6
Sectional Overhead Door Operating Instructions G. Manual (Push Up) For door operation instructions, refer to section “A”. In addition, a pull cord may be attached to assist in opening and closing. H. Hand Chain Operated For door operations instructions, refer to section “B”. I.
Page 7
Sliding Folding Door Operating Instructions (cont). Electrically Operated TO OPEN: Press “Open” button on central control station, the door will automatically stop when fully open. TO CLOSE: Press “Close” button on central control station, the door will automatically stop when fully closed, or when button is released.
Mel-Tec type 4FMB Roller Shutters The shutter curtain is fitted to a steel roller. This roller revolves to wind up or wind down the shutter curtain. One end of the roller is fitted with an electric motor, whilst the other end of the roller is fitted with a safety brake.
Page 9
MAINTENANCE: It is STRONGLY recommended that a Preventative Maintenance Contract be arranged with a competent shutter maintenance company - BGID offer such maintenance contracts. The shutter guides should be kept clean and free from any materials that might jamb the shutter curtain. All electrical components should be checked on a regular basis –...
Safety Instructions Warning : All types of Roller Shutter and Sectional Overhead Doors are fitted with counter balance spring mechanisms, which are under considerable tension. Any adjustment or repair MUST only be carried out by trained and qualified BGID installation engineers. GENERAL Safety Instructions 1.
Industrial Doors now have to comply with these regulations as from 1 January 1996 by door user - door operation is working freely and there is no visible damage to the door. by Approved Industrial Door Engineers – commonly twice per annum. secure any loose fastenings fully inspect all mechanical points...
Page 12
flexability is our strength BIRMINGHAM GARAGE & INDUSTRIAL DOORS LTD UNITS 3,10 & 12 GRIFFIN INDUSTRIAL ESTATE PENNCRICKET LANE ROWLEY REGIS WEST MIDLANDS B65 0SN Tel: 0121 559 8666 Fax: 0121 561 1101 Web: www.bgid.co.uk...
Need help?
Do you have a question about the Industrial Door and is the answer not in the manual?
Questions and answers