17. Carefully release these plastic clips with the SS-93.
19. Slightly release the TOP KEY FLEX ASSEMBLY. Ensure that the
double side adhesive tape remains in the cover.
21. Remove the DC JACK and the LOCK KEY.
23. Unscrew these Torx Plus size 4 screws in the oder thown.
Discard these screws. Do not use them again.
Page
13
(16)
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
18. Lift out the ENGINE MODULE.
20. The KEYS can be removed if necessary.
22. Remove both screws of the STANDING SUPPORT. Discard
these screws. Do not use them again.
24. Shift down the SLIDE ASSEMBLY to reach the next screws.
Also unscrew this screws and discard them.
N810 RX-44
Service Manual Level 1&2
ISSUE 1