Econo Floss 3017 Operating Instructions

COTTON CANDY
MACHINE
ALL PARTY RENTALS
5445 BROADWAY
MERRILLVILLE. IN 46410
(219) 887-9644
ELECTRICAL REQUIREMENTS
, You must have
i
the floss
! machine
grounded! No
exceptionslI!
The GOLD MEDAL Floss machine requires a 15 amp, 120 volt, 60 cycle electrical
service.
The power supply cord is equipped with a machine ground (the tubular prong on the
male plug). For safety, always plug the machine into a grounded receptacle, which
has been tested for proper polarity to insure electrical safety.
CONTROLS AND FUNCTIONS
MAIN SWITCH -
Turns motor "on" or "off" and supplies current to the heat switch.
HEAT SW ITCH -
Turns current to the heating element (ribbon) "on" or "off."
HEAT CONTROL -
Increases or decreases voltage to ribbon wire heating element using a graduated dial.
All Models #3017, #301788, and #3077