ISHIDA IGB Series Operation Manual page 37

6.2 Specifications
IGB Series
Item
Model Name
Weighing Capacity
Graduation
Accuracy
Weighing Platter
Exterior Material
Display Angle Adjust
Weight
Environmental Condition
Power Source
Power Consumption
Display
Tare Subtraction
Preset Function
Upper Limit Range
Lower Limit Range
Auto Power Off
Auto Preset Call-up
Battery Check Mode
Buzzer
ON/OFF Switch
Option
page 34
IGB-60
<OIML Approved>
60 kg / 150 lb
0.02 kg / 0.05 lb
1/3000
550 mm (L) x 400 mm (W)
Display: ABS resins
Display pole: Aluminum die-cast
Weighing platter: Stainless (SUS304)
Angle adjustable from the horizon (0°) to the front, Knob locking method
16.0 kg (excluding batteries)
Temperature from -5°C to +40°C, Relative humidity 80%RH (max.)
without condensation
Two dray batteries (not attached to machine), or optional AC adapter
[Battery Life]
Conditions: No option, Temperature 20°, Relative humidity 60%RH
Two "D" size alkaline batteries (Approx. 500H continuous use)
2.4 to 6VDC: 25mA
LCD
Numerics: 6 digits, Height 25 mm
Mark: Battery. Zero point, Now subtracting tare, Stable, Weight unit
(kg･lb), Over, Under, Accept
Key-in tare
Preset tare
[Program Mode] 10 PLUs from PLU 1 to PLU 10
(Tare weight, Upper limit, Lower limit)
More than the lower limit, within 5 digits (99999)
Less than the upper limit (5 digits in case of the upper limit = 0)
[Setup Mode] None/10min./ 20min./ 30min./ 40min./ 50min./ 60min.
[Setup Mode] Function "Yes"/"No" selection
(PLU 1 is called up when the power is ON.)
Yes
No
AC adapter (Dealer option)
Contents
IGB-150
150 kg / 300 lb
0.05 kg / 0.1 lb
IGX/IGB Series Operation Manual No. 0202A