Add Ip Cameras - Provision ISR NVR-16400 User Manual

4

Add IP Cameras

This chapter mainly introduces how to connect multiple IP cameras through NVR. Once you
finish adding IP cameras, you can see the live images through the monitor of the NVR. Here
we will introduce how to add cameras via WAN/LAN network.
To add IP cameras via LAN:
Step 1: Please Enter into MenuIP Camera tab. Refer to Fig 4-1. Click "Search" button to
search the devices in the same local network.
Step 2: Enter into the search tab. Click "Refresh" to refresh the searched devices. You can
modify the IP address of the searched device by checking the device and clicking "Setup"
button.
Note: If the network of IP cameras and NVR are in LAN, their IP address must be in the
same network segment. For example: If the IP address of NVR is 192.168.013.057, the
IP address of IP camera must be 192.168.013.XXX.
Fig 4-1 Device Management
Fig 4-2 Search Devices