Schematic Diagram; Block Diagram - Panasonic SJ-MR200 Service Manual

Components identified by
Furthermore, special parts which have purpose of fire-retardant (resistors), high-quality sound
(capacitors), low-noise (resistors), etc. are used. When replacing any of components, be sure to
use only manufacture's specified parts shown in theparts list.
Caution!
IC and LSI are sensitive to static electricity.
Secondary trouble can be prevented by taking care during repair.
Cover the parts boxes made of plastics with aluminum foil.
Ground the soldering iron.
Put a conductive mat on the work table.
Do not touch the legs of IC or LSI with the fingers directly.
Voltage and signal line
: Positive voltage line
: Playback signal line
: Recording signal "digital" line
: Recording signal "analog" line
: Mic signal line
10.2. Type Illustration of IC's, Transistors and Diodes

11. Schematic Diagram

12. Printed Circuit Board Diagram

13. Block Diagram

14. Wiring Connection Diagram
15. Terminal Function of IC's
15.1. IC1 (AN8772FHKEBV) : RF AMP
mark have special characteristics important for safety.
35