Operation; Charcoal Filters - FALMEC range hood Instruction Booklet

to the motor, and if not, install them as described in the instructions in point H.
If the hood is of filtering type, remove the non-return valve fitted at the motor's
outlet.
For maximum efficiency, the third speed should be used when there are strong
odours or a lot of steam, the second speed in normal conditions, and the first
speed for keeping the air clean with minimum energy consumption. The range
hood should be switched on when starting to cook, and left on until the odours
disappear.
G

OPERATION

TWO BUTTON CONTROL PANEL
LIGHT - Switch A
Position 0: the light is off.
Position 1: the light is on.
SPEED - Switch B
This is used to start and set the speed of the motor, from 1 to 3, or with continu-
ous speed variator, depending on the version.
LIGHT - C
Motor operation indicator light.
H
FILTERS
1. METAL FILTERS
To remove the metal grease-trapping filter, using the handle A until releas-
ing it from the guide. To reposition the filter, repeat the operation in the
reverse order.

2. CHARCOAL FILTERS

To replace the charcoal filters, proceed as follows: remove the metal filters
as described above. The two filters located at the ends of the motor can now
be easily accessed.
To install the new fi lters see picture.
To order new charcoal fi lters, contact your distributor/dealer.
12
REMOVING AND REPLACING'S INSTRUCTIONS
A