Xtreamer e-TRAYz User Manual page 103

Reguest a password initialization to administrator. Administrator click user ID at [Settings] – [Privileges] – [User]
•
page. Initialize user's password. New password will be set as same as ID.
Forgot password? : Administrator
Click 'Password initialization' menu at the lower of password field. Enter installation key and click 'Clear'
•
button. New password will be set as same as ID.
Want to know the firmware version.
Access to e-TRAYz Home page. Firmware version is displayed at the top of screen. (ex. Ver.1.0.0)
•
You can also see the version at [Settings] – [System] – [Upgrade] page too.
•
Can not the USB copy.
Verify that USB disk has been correctly connected. Port for Copy function is the lower port of copy button.
•
Make sure that e-TRAyz have enough capacity for USB copy.
•
Where is USB device connected e-TRAYz?
The connected USB device is in the External Disk as USB1 and USB2.
•
Can not upload data to USB devices.
Make sure that USB device have enough capacity.
•
If a file system of USB device is NTFS, it is possible to upload or edit files to USB devie. Please use the USB
•
device after formatted as FAT32 or XFS.
Want to upgrade Software.
Move to [Settings] – [System] – [Upgrade] page. You can see all the firmware files. Upgrade firmware refer to
•
[Settings] – [Firmware upgrade] menu of this manual.
Want to Shutdown system.
Move to [Settings] – [System] – [Power] page. Choose 'ShutDown' and click 'OK' button.
•
If you cannot access to 'Settings', Turn off the Power switch of device.
•
Can Mac or Linux users use it too?
• Mac or Linux users can use all of the Xtreamer e-TRAYz function except 'e-TRAYz' using e-TRAYz connector.
103