Note to CATV system installer: This reminder is provided to call 9) Refer all servicing to qualified service personnel. Servicing is the CATV system installer’s attention to Article 820-40 of the NEC required when the apparatus has been damaged in any way, such (of USA) that provides guidelines for proper grounding.
Step 3: Connect the enclosed external telescopic antenna. You will find the antenna connector in the Geneva Sound System back How to verify that the remote control works? panel (see picture below). Every time a key is pressed on the remote control, a small red light on the display lights up quickly.
2. Listening to the iPod Step 1. To use the Geneva Sound System with an iPod, select iPod as the audio source using the key: the iPod dock will automatically open and the display under the grille should display “no iPod”.
1. Use a cable with a 3.5mm jack to connect the Geneva Sound 3. If still not successful, contact our customer support. System to any audio device that has an audio out connector.
Need help?
Do you have a question about the S and is the answer not in the manual?
Questions and answers