Page 4
Eventuelle Bodenunebenheiten müssen ausgeglichen werden. Hinterlassen Sie das Fitnessgerät so, dass sich niemand an herausstehenden Teilen verletzen kann. Hantelscheiben und Stangen sind nach dem Training vom Gerät zu nehmen und in die dafür vorgesehenen Ablagesysteme zu verstauen. MT-TX-WS-30 Triplex Workout Station...
Place the exercise machine such that no one can hurt his or herself on protruding parts. Weight plates and bars should be removed from the machine after training, and stowed away in the storage system provided. MT-TX-WS-30 Triplex Workout Station...
After assembly, check to make sure all of the machine’s functions are correct. If problems occur in this respect, check the machine for any errors in assembly with attention to the individual installation steps. Should you be unable to resolve the error, then please consult your dealer. MT-TX-WS-30 Triplex Workout Station...
Page 12
Bauteile exakt ausrichten zu können. Tighten all screws only slightly. You may have to loosen screws again in the course of individual installation steps, in order to precisely align the components. MT-TX-WS-30 Triplex Workout Station...
Page 13
STEP - 3 Alle Teile exakt ausrichten und sämtliche Schrauben festziehen. Align all parts accurately and then tighten all screws. MT-TX-WS-30 Triplex Workout Station...
Page 14
STEP – 4 Die Sicherungsmuttern (2) nur soweit festziehen bis der Hebel (24) stramm sitzt ohne die Kugellager festzuklemmen! Tighten the autolock nuts (2) until the radial arm (24) fits tight without clamping the Bearings! MT-TX-WS-30 Triplex Workout Station...
Page 15
STEP - 5 Die Sicherungsmutter (2) nur soweit festziehen bis der Hebel (18) stramm sitzt ohne festzuklemmen! Tighten the autolock nut (2) until the radial arm (18) fits tight without clamping! MT-TX-WS-30 Triplex Workout Station...
Page 16
Seilrollen auf freigängigkeit prüfen! Seile wie dargestellt einfädeln. Eventuell müssen dazu einige der Seilrollen demontiert werden. Check the cable pulleys for free rotating! Thread in the cables as shown. Possibly some of the cable pulleys need to disassemble. MT-TX-WS-30 Triplex Workout Station...
Page 17
Hebelarme auf die Achse (25) schieben und die Sicherungsmuttern (2) nun soweit festziehen bis die Hebel stramm sitzen ohne festzuklemmen! Push the Leverarms on the axle (25), and then tighten the autolock nuts (2) until the Arms fits tight without clamping! MT-TX-WS-30 Triplex Workout Station...
The steel cables should be carefully checked daily. In particular, the connection areas at the ends of the cables should be checked for tightness and evidence of fracturing. If the steel cable is damaged, training must be stopped and the cables immediately replaced. Failure to do so can lead to injury! MT-TX-WS-30 Triplex Workout Station...
Pay attention to your breathing. Never hold your breath while exercising. Basically, exhale when lifting the weight and inhale when lowering it. Make sure you are sufficiently familiar with all of the machine’s functions. MT-TX-WS-30 Triplex Workout Station...
Only use original spare parts to assure your warranty claims, and to avoid the risk of an injury. Making your own modifications to the machine, and non-compliance with capacity limits, render all warranty claims null and void. Importeur: IFS GmbH Lothforster Strasse 46 41849 Wassenberg MT-TX-WS-30 Triplex Workout Station...
Need help?
Do you have a question about the MT-TX-WS-30 and is the answer not in the manual?
Questions and answers